# 14 pin cord for spindle controller

**URL:** <https://forum.avidcnc.com/t/14-pin-cord-for-spindle-controller/5279>\
**Category:** General Chat\
**Created:** [September 22, 2025, 5:11pm UTC](https://forum.avidcnc.com/t/14-pin-cord-for-spindle-controller/5279 "2025-09-22T17:11:15Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JeffZitur](https://avatars.discourse-cdn.com/v4/letter/j/a3d4f5/32.png) [@JeffZitur](https://forum.avidcnc.com/u/JeffZitur)\
**Post date:** [September 22, 2025, 5:11pm UTC](https://forum.avidcnc.com/t/14-pin-cord-for-spindle-controller/5279/1 "2025-09-22T17:11:15Z")

</div>

Does anyone know where I can buy a cord for the 14 pin connector that goes between the spindle control box and the avid box? I asked avid support but they must be kind of busy.

---

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [September 22, 2025, 5:31pm UTC](https://forum.avidcnc.com/t/14-pin-cord-for-spindle-controller/5279/2 "2025-09-22T17:31:57Z")

</div>

We can sell you one, shoot support an email if you haven’t already and they will get you setup.

It’s Monday and they’re on PST so I’m sure they’re just getting in and caught up with weekend stuff.

---

<div class="post-metadata">

**Author:** ![JeffZitur](https://avatars.discourse-cdn.com/v4/letter/j/a3d4f5/32.png) [@JeffZitur](https://forum.avidcnc.com/u/JeffZitur)\
**Post date:** [September 22, 2025, 6:23pm UTC](https://forum.avidcnc.com/t/14-pin-cord-for-spindle-controller/5279/3 "2025-09-22T18:23:49Z")

</div>

Thank you they just got back to me.