# 325 limit job cancelled **URL:** \ **Category:** General Chat\ **Created:** [March 26, 2025, 12:46pm UTC](https://forum.avidcnc.com/t/325-limit-job-cancelled/4541 "2025-03-26T12:46:07Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![norbertracz](https://avatars.discourse-cdn.com/v4/letter/n/5f9b8f/32.png) [@norbertracz](https://forum.avidcnc.com/u/norbertracz)\ **Post date:** [March 26, 2025, 12:46pm UTC](https://forum.avidcnc.com/t/325-limit-job-cancelled/4541/1 "2025-03-26T12:46:07Z")
hi i am absolutely new. I just build my pro4896 machine I try to do a gantry square procedure. when I try to use the touch plate but after touch the bottom and the right side it is showing 325 Limit: job cancelled. ![IMG_1905](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/4/46e9098d1bbed2ecad3d1953fde39df6a9c63170.jpeg) ---
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [March 26, 2025, 12:57pm UTC](https://forum.avidcnc.com/t/325-limit-job-cancelled/4541/2 "2025-03-26T12:57:21Z")
The error you’re seeing shows the machine trying to move outside it’s travel limit in X. Are you able to jog by hand in X to the extents of the machine? ---
**Author:** ![norbertracz](https://avatars.discourse-cdn.com/v4/letter/n/5f9b8f/32.png) [@norbertracz](https://forum.avidcnc.com/u/norbertracz)\ **Post date:** [March 26, 2025, 1:15pm UTC](https://forum.avidcnc.com/t/325-limit-job-cancelled/4541/3 "2025-03-26T13:15:45Z")
yes i do ---
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [March 26, 2025, 1:35pm UTC](https://forum.avidcnc.com/t/325-limit-job-cancelled/4541/4 "2025-03-26T13:35:23Z")
What is it you’re trying to use your touch plate on? Can you show us a picture? If you’re trying to find the corner of your spoilboard I wonder if your touch plate is right on the edge of where the machine can reach? ---
**Author:** ![norbertracz](https://avatars.discourse-cdn.com/v4/letter/n/5f9b8f/32.png) [@norbertracz](https://forum.avidcnc.com/u/norbertracz)\ **Post date:** [March 26, 2025, 1:40pm UTC](https://forum.avidcnc.com/t/325-limit-job-cancelled/4541/5 "2025-03-26T13:40:39Z")
![View recent photos](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/a/ad7fe3de57afae182a4a74d73b33a8feddbc97b9.jpeg) ---
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [March 26, 2025, 1:46pm UTC](https://forum.avidcnc.com/t/325-limit-job-cancelled/4541/6 "2025-03-26T13:46:34Z")
Are you able to freely jog to the left far past the touch plate? ---
**Author:** ![norbertracz](https://avatars.discourse-cdn.com/v4/letter/n/5f9b8f/32.png) [@norbertracz](https://forum.avidcnc.com/u/norbertracz)\ **Post date:** [March 26, 2025, 2:24pm UTC](https://forum.avidcnc.com/t/325-limit-job-cancelled/4541/7 "2025-03-26T14:24:44Z")
no i can not ---
**Author:** ![norbertracz](https://avatars.discourse-cdn.com/v4/letter/n/5f9b8f/32.png) [@norbertracz](https://forum.avidcnc.com/u/norbertracz)\ **Post date:** [March 26, 2025, 2:46pm UTC](https://forum.avidcnc.com/t/325-limit-job-cancelled/4541/8 "2025-03-26T14:46:22Z")
now it is hitting the touch plate side hard ---
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [March 26, 2025, 2:48pm UTC](https://forum.avidcnc.com/t/325-limit-job-cancelled/4541/9 "2025-03-26T14:48:19Z")
If you can’t jog your machine all the way to the left of the touch plate (based on your picture) then there’s something not setup right with your machine. Please open up a support ticket and someone will help you troubleshoot: Use the “support” link at the top of this page. ---
**Author:** ![norbertracz](https://avatars.discourse-cdn.com/v4/letter/n/5f9b8f/32.png) [@norbertracz](https://forum.avidcnc.com/u/norbertracz)\ **Post date:** [March 26, 2025, 2:49pm UTC](https://forum.avidcnc.com/t/325-limit-job-cancelled/4541/10 "2025-03-26T14:49:08Z")
somehow the touch plate settings was changed ---
**Author:** ![norbertracz](https://avatars.discourse-cdn.com/v4/letter/n/5f9b8f/32.png) [@norbertracz](https://forum.avidcnc.com/u/norbertracz)\ **Post date:** [March 26, 2025, 3:00pm UTC](https://forum.avidcnc.com/t/325-limit-job-cancelled/4541/11 "2025-03-26T15:00:18Z")
actually I can jog it I did moved the wood from the end of the machine but the problem is same job canceled. when the bit touch the side it is moving a bit even if I hold it ---
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [March 26, 2025, 4:16pm UTC](https://forum.avidcnc.com/t/325-limit-job-cancelled/4541/12 "2025-03-26T16:16:56Z")
I’d open a support ticket so someone can help troubleshoot ---
**Author:** ![norbertracz](https://avatars.discourse-cdn.com/v4/letter/n/5f9b8f/32.png) [@norbertracz](https://forum.avidcnc.com/u/norbertracz)\ **Post date:** [March 26, 2025, 4:27pm UTC](https://forum.avidcnc.com/t/325-limit-job-cancelled/4541/13 "2025-03-26T16:27:40Z")
I did thank you ---
**Author:** ![norbertracz](https://avatars.discourse-cdn.com/v4/letter/n/5f9b8f/32.png) [@norbertracz](https://forum.avidcnc.com/u/norbertracz)\ **Post date:** [March 30, 2025, 4:29pm UTC](https://forum.avidcnc.com/t/325-limit-job-cancelled/4541/14 "2025-03-30T16:29:17Z")
The support was amazing they solved the problem. That was my mistake of course. First I setup the machine for mm but then I changed my mind and changed the settings to inch. Only problem was even if the program showed in inch the machine tried to work with mm. Anyway thank you for trying to help me.