# 4 HP Plug and Play Spindle / VFD System, crp 800

**URL:** <https://forum.avidcnc.com/t/4-hp-plug-and-play-spindle-vfd-system-crp-800/2176>\
**Category:** Buy & Sell\
**Created:** [June 22, 2023, 4:09pm UTC](https://forum.avidcnc.com/t/4-hp-plug-and-play-spindle-vfd-system-crp-800/2176 "2023-06-22T16:09:50Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Joshuabenji](https://avatars.discourse-cdn.com/v4/letter/j/bcef8e/32.png) [@Joshuabenji](https://forum.avidcnc.com/u/Joshuabenji)\
**Post date:** [June 22, 2023, 4:09pm UTC](https://forum.avidcnc.com/t/4-hp-plug-and-play-spindle-vfd-system-crp-800/2176/1 "2023-06-22T16:09:50Z")

</div>

I am selling my 4hp spindle and the control box that goes along with it, it’s ready to cut, I realized the machine has more power than I need right now and plan to move to a lower power spindle. It’s been lightly used in the early process of me get things things set up and dialed in, it will come with a custom 3D printed housing for chip evacuation, collets and all the necessary mounting hardware. The machine is nearly new and has been babied over the last few months as I am a hobbyist my jobs have been small and for stuff I’m working on. It is the crp 800 model offered through avid. If you have any questions please reach out.

I am asking 1500 for the set up considering the dust manifold and the fact that it’s nearly new. Shipping will be an additional 100 dollar. Thanks for checking it out.

 ![image](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/e/e03da8da26d9f921a820a3c720469955d48a3cce.jpeg)

---

<div class="post-metadata">

**Author:** ![nateD](https://avatars.discourse-cdn.com/v4/letter/n/ce7236/32.png) [@nateD](https://forum.avidcnc.com/u/nateD)\
**Post date:** [May 2, 2025, 5:58pm UTC](https://forum.avidcnc.com/t/4-hp-plug-and-play-spindle-vfd-system-crp-800/2176/2 "2025-05-02T17:58:22Z")

</div>

I assume you sold this?