# 45w laser settings for cutting 6mm baltic birch

**URL:** <https://forum.avidcnc.com/t/45w-laser-settings-for-cutting-6mm-baltic-birch/5741>\
**Category:** General Chat\
**Tags:** lasers\
**Created:** [February 10, 2026, 1:31am UTC](https://forum.avidcnc.com/t/45w-laser-settings-for-cutting-6mm-baltic-birch/5741 "2026-02-10T01:31:04Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [February 10, 2026, 1:35am UTC](https://forum.avidcnc.com/t/45w-laser-settings-for-cutting-6mm-baltic-birch/5741/2 "2026-02-10T01:35:24Z")

</div>

See this post here: [Laser Feed and Speed Chart](https://forum.avidcnc.com/t/laser-feed-and-speed-chart/5374)

I’d start with those settings (make sure you’re cutting laser safe foam!)

If those work, report back. If you find some other settings that work also report back.

If you’re cutting some different foam and you figure out some good feeds and speeds we can add them to that list

---

_[View the full topic](https://forum.avidcnc.com/t/45w-laser-settings-for-cutting-6mm-baltic-birch/5741)._