# Almost new 8.7 HP Spindle lightly used $1800.00 **URL:** \ **Category:** Buy & Sell\ **Created:** [April 28, 2025, 2:43am UTC](https://forum.avidcnc.com/t/almost-new-8-7-hp-spindle-lightly-used-1800-00/4655 "2025-04-28T02:43:58Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![EdCNC](https://avatars.discourse-cdn.com/v4/letter/e/b3f665/32.png) [@EdCNC](https://forum.avidcnc.com/u/EdCNC)\ **Post date:** [April 28, 2025, 2:43am UTC](https://forum.avidcnc.com/t/almost-new-8-7-hp-spindle-lightly-used-1800-00/4655/1 "2025-04-28T02:43:58Z")
The 8.7 HP Spindle has been replaced by a new 4Hp ATC spindle. The 8.7 HP Spindle was lightly used in my Hobby Shop. I think between 50 and 150 hours I just don’t use the machine much. ---
**Author:** ![nateD](https://avatars.discourse-cdn.com/v4/letter/n/ce7236/32.png) [@nateD](https://forum.avidcnc.com/u/nateD)\ **Post date:** [April 28, 2025, 3:04am UTC](https://forum.avidcnc.com/t/almost-new-8-7-hp-spindle-lightly-used-1800-00/4655/2 "2025-04-28T03:04:17Z")
any pictures? Location? Are you the original owner? I’m interested. ---
**Author:** ![EdCNC](https://avatars.discourse-cdn.com/v4/letter/e/b3f665/32.png) [@EdCNC](https://forum.avidcnc.com/u/EdCNC)\ **Post date:** [April 28, 2025, 3:18am UTC](https://forum.avidcnc.com/t/almost-new-8-7-hp-spindle-lightly-used-1800-00/4655/3 "2025-04-28T03:18:39Z")
I am original owner. I live near Palm Springs California. I can send you pictures tomorrow. Ed Fleming ---
**Author:** ![nateD](https://avatars.discourse-cdn.com/v4/letter/n/ce7236/32.png) [@nateD](https://forum.avidcnc.com/u/nateD)\ **Post date:** [April 28, 2025, 3:27am UTC](https://forum.avidcnc.com/t/almost-new-8-7-hp-spindle-lightly-used-1800-00/4655/4 "2025-04-28T03:27:16Z")
Thanks ---
**Author:** ![EdCNC](https://avatars.discourse-cdn.com/v4/letter/e/b3f665/32.png) [@EdCNC](https://forum.avidcnc.com/u/EdCNC)\ **Post date:** [April 28, 2025, 4:40pm UTC](https://forum.avidcnc.com/t/almost-new-8-7-hp-spindle-lightly-used-1800-00/4655/5 "2025-04-28T16:40:06Z")
![](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/6/65d4336a731c72658eec9d9bee152cd802b19837.jpeg) ---
**Author:** ![nateD](https://avatars.discourse-cdn.com/v4/letter/n/ce7236/32.png) [@nateD](https://forum.avidcnc.com/u/nateD)\ **Post date:** [April 28, 2025, 4:55pm UTC](https://forum.avidcnc.com/t/almost-new-8-7-hp-spindle-lightly-used-1800-00/4655/6 "2025-04-28T16:55:30Z")
Thanks Ed - so not VFD with it? just the spindle? ---
**Author:** ![EdCNC](https://avatars.discourse-cdn.com/v4/letter/e/b3f665/32.png) [@EdCNC](https://forum.avidcnc.com/u/EdCNC)\ **Post date:** [April 28, 2025, 5:46pm UTC](https://forum.avidcnc.com/t/almost-new-8-7-hp-spindle-lightly-used-1800-00/4655/7 "2025-04-28T17:46:33Z")
Yes as the ad says 8.5 HP spindle ---
**Author:** ![nateD](https://avatars.discourse-cdn.com/v4/letter/n/ce7236/32.png) [@nateD](https://forum.avidcnc.com/u/nateD)\ **Post date:** [April 28, 2025, 8:20pm UTC](https://forum.avidcnc.com/t/almost-new-8-7-hp-spindle-lightly-used-1800-00/4655/8 "2025-04-28T20:20:15Z")
Ed - I am so sorry. I’m kind of new to Avid CnC’s so I wasn’t 100% sure what was included. Most of the ads I had seen showed both so I wasn’t sure about yours and I wasn’t sure the correct name of it. I guess I’m going to have to pass as I was kind of looking for that complete package where I could plug and play. I don’t even have an avid yet, but I thought if I found a good deal on a spindle I would buy it for the future. Again so sorry about that. ---
**Author:** ![EdCNC](https://avatars.discourse-cdn.com/v4/letter/e/b3f665/32.png) [@EdCNC](https://forum.avidcnc.com/u/EdCNC)\ **Post date:** [April 28, 2025, 8:32pm UTC](https://forum.avidcnc.com/t/almost-new-8-7-hp-spindle-lightly-used-1800-00/4655/9 "2025-04-28T20:32:01Z")
No problem it is a good deal. It cost me Over $3500. Yeah ---
**Author:** ![EdCNC](https://avatars.discourse-cdn.com/v4/letter/e/b3f665/32.png) [@EdCNC](https://forum.avidcnc.com/u/EdCNC)\ **Post date:** [April 28, 2025, 8:38pm UTC](https://forum.avidcnc.com/t/almost-new-8-7-hp-spindle-lightly-used-1800-00/4655/10 "2025-04-28T20:38:13Z")
Nate, I’ve had the CNC for four or five years now I had another spindle not not avid a Chinese spindle with tool change ability and I spent a lot of effort matching it to The avid system. I have given up on any of the do-it-yourself stuff I purchased this spindle and the control package direct from avid and waited almost a year until the correct spindle was available. Meanwhile, I was using the machine with this spindle that I’m selling now so now I have the avid with all avid equipment. I have everything I need for automatic tool change, except the tool rack that avid is working on it will not be available till the end of the year and then I’ll have everything I want The bottom line is that I have the price of a 4 x 8 machine plus probably $10,000 for the spindle. I now have with the ATC ability ability, but I still have probably three Thousand more for their Rack Out of curiosity, where do you live? Ed ---
**Author:** ![nateD](https://avatars.discourse-cdn.com/v4/letter/n/ce7236/32.png) [@nateD](https://forum.avidcnc.com/u/nateD)\ **Post date:** [April 28, 2025, 11:54pm UTC](https://forum.avidcnc.com/t/almost-new-8-7-hp-spindle-lightly-used-1800-00/4655/11 "2025-04-28T23:54:50Z")
Thanks Ed - I’m located in Minnesota so a little far from you my friend. I’ve been on this forum for about a week and I’m coming from more bench top cnc’s like the onefinity. This is a great good of folks on this forum. ---
**Author:** ![EdCNC](https://avatars.discourse-cdn.com/v4/letter/e/b3f665/32.png) [@EdCNC](https://forum.avidcnc.com/u/EdCNC)\ **Post date:** [April 29, 2025, 12:06am UTC](https://forum.avidcnc.com/t/almost-new-8-7-hp-spindle-lightly-used-1800-00/4655/12 "2025-04-29T00:06:46Z")
Nate, I find lots of good deals on craigslist have you checked it?