# Anyone have a Touch Plate they are not using and want to sell? **URL:** \ **Category:** Buy & Sell\ **Created:** [January 13, 2024, 8:54pm UTC](https://forum.avidcnc.com/t/anyone-have-a-touch-plate-they-are-not-using-and-want-to-sell/2842 "2024-01-13T20:54:58Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![jensenkd](https://avatars.discourse-cdn.com/v4/letter/j/c37758/32.png) [@jensenkd](https://forum.avidcnc.com/u/jensenkd)\ **Post date:** [January 13, 2024, 8:54pm UTC](https://forum.avidcnc.com/t/anyone-have-a-touch-plate-they-are-not-using-and-want-to-sell/2842/1 "2024-01-13T20:54:58Z")
I’m interested in picking one up but not at $165. ---
**Author:** ![Ryansuperbee](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@Ryansuperbee](https://forum.avidcnc.com/u/Ryansuperbee)\ **Post date:** [February 2, 2024, 11:07pm UTC](https://forum.avidcnc.com/t/anyone-have-a-touch-plate-they-are-not-using-and-want-to-sell/2842/2 "2024-02-02T23:07:17Z")
I have one that I will sell you. Just make me an offer and pay for the shipping. -Ryan 480-604-5244 ---
**Author:** ![Paradox](https://avatars.discourse-cdn.com/v4/letter/p/958977/32.png) [@Paradox](https://forum.avidcnc.com/u/Paradox)\ **Post date:** [May 15, 2024, 7:42am UTC](https://forum.avidcnc.com/t/anyone-have-a-touch-plate-they-are-not-using-and-want-to-sell/2842/3 "2024-05-15T07:42:33Z")
Bump\* I too, am looking to save a penny on a touch plate. Buying an RM70 recently kind of broke the bank for a little while here. -Thomas 4024328764 (Text or leave VM) ---
**Author:** ![woodworker2](https://avatars.discourse-cdn.com/v4/letter/w/9fc348/32.png) [@woodworker2](https://forum.avidcnc.com/u/woodworker2)\ **Post date:** [June 4, 2024, 1:08am UTC](https://forum.avidcnc.com/t/anyone-have-a-touch-plate-they-are-not-using-and-want-to-sell/2842/4 "2024-06-04T01:08:41Z")
What kind are you looking for? ---
**Author:** ![Paradox](https://avatars.discourse-cdn.com/v4/letter/p/958977/32.png) [@Paradox](https://forum.avidcnc.com/u/Paradox)\ **Post date:** [June 4, 2024, 3:56am UTC](https://forum.avidcnc.com/t/anyone-have-a-touch-plate-they-are-not-using-and-want-to-sell/2842/5 "2024-06-04T03:56:23Z")
TBH, I don’t really know alot about them. I know I am going to need one though. I recently bought a FM70C kit from CNCDepot and am working on implementing it currently. From my understanding It is easier to setup your tools for the ATC with a touch plate. Do you or anyone have any advice on what direction to go or look? ---
**Author:** ![nateD](https://avatars.discourse-cdn.com/v4/letter/n/ce7236/32.png) [@nateD](https://forum.avidcnc.com/u/nateD)\ **Post date:** [May 3, 2025, 9:38am UTC](https://forum.avidcnc.com/t/anyone-have-a-touch-plate-they-are-not-using-and-want-to-sell/2842/6 "2025-05-03T09:38:27Z")
I’m also looking for one if someone has one in good condition for a discounted price? ---
**Author:** ![corbin](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/corbin/32/2800_2.png) [@corbin](https://forum.avidcnc.com/u/corbin)\ **Post date:** [May 3, 2025, 3:45pm UTC](https://forum.avidcnc.com/t/anyone-have-a-touch-plate-they-are-not-using-and-want-to-sell/2842/7 "2025-05-03T15:45:11Z")
> [@Paradox](#): > > TBH, I don’t really know alot about them. I know I am going to need one though. I recently bought a FM70C kit from CNCDepot and am working on implementing it currently. From my understanding It is easier to setup your tools for the ATC with a touch plate. Do you or anyone have any advice on what direction to go or look? You specifically want a tool touch off plate, commonly called the “TT”, or a “tool sensor gauge”. These need to be a fixed location on your machine for repeatability; the avid’s one could work, but you would probably be better off getting another one that doesn’t require grounding. Avid’s is better for use as a traditional touch plate: finding the z-zero and x/y origin of a workpiece. ---
**Author:** ![corbin](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/corbin/32/2800_2.png) [@corbin](https://forum.avidcnc.com/u/corbin)\ **Post date:** [May 3, 2025, 3:48pm UTC](https://forum.avidcnc.com/t/anyone-have-a-touch-plate-they-are-not-using-and-want-to-sell/2842/8 "2025-05-03T15:48:51Z")
IE, this might work as a TT, but I’m not 100% sure. It is definitely cheap enough to try it out! > **[Amazon.com: BTER CNC Automatic Tool Sensor Gauge, DC 24V Normally Closed CNC Z...](https://www.amazon.com/BTER-Automatic-Normally-Accuracy-Engraving/dp/B09V5RNGS2)** > > Feature: 1 STRONG MAGNET: Bottom magnet design, can be directly connected to the machine, firmly attached to the body 2 CARBIDE PROBE: The tool probe is made of cemented carbide, with fine processing, hard and wear resistant 3 GOOD SEALING: With... ---
**Author:** ![nateD](https://avatars.discourse-cdn.com/v4/letter/n/ce7236/32.png) [@nateD](https://forum.avidcnc.com/u/nateD)\ **Post date:** [May 3, 2025, 7:43pm UTC](https://forum.avidcnc.com/t/anyone-have-a-touch-plate-they-are-not-using-and-want-to-sell/2842/9 "2025-05-03T19:43:31Z")
Thanks Corbin…the funny thing is I already one of those that I could keep from my onefinity that I’m selling.