# Anyone into home gyms?

**URL:** <https://forum.avidcnc.com/t/anyone-into-home-gyms/273>\
**Category:** Off Topic\
**Created:** [October 14, 2022, 6:42pm UTC](https://forum.avidcnc.com/t/anyone-into-home-gyms/273 "2022-10-14T18:42:08Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![MajorTendonitis](https://avatars.discourse-cdn.com/v4/letter/m/ebca7d/32.png) [@MajorTendonitis](https://forum.avidcnc.com/u/MajorTendonitis)\
**Post date:** [October 14, 2022, 6:42pm UTC](https://forum.avidcnc.com/t/anyone-into-home-gyms/273/1 "2022-10-14T18:42:08Z")

</div>

Hi all first post. I have an Avid cnc Pro that someday hopefully gets assembled, but for now I thought I’d show my ongoing home gym project . I live in a rather old mundane house with a 7’ ceiling in the basement , so I have to improvise a little . Overhead presses ard fine sitting on a bench and better for your back anyways .  
The bumper plate storage racks come in very handy . They were made with floor flanges to hold gas pipe covered in heat shrink .

 ![image](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/1X/51304c75ac8853fad95e7f103c7333619f882dd7.jpeg)  
 ![image](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/1X/42b25cd4de05353f71f2727f2032dceb16d7ed0e.jpeg)  
Everything yellow is being changed to orange as I get time .  
 ![image](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/1X/d660ad3e86c98d6ad02b1d37b8e011f88064c4d9.jpeg)  
 ![image](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/1X/fcf62fd869d3c952c52dbe2157900f8a02b913e2.jpeg)  
 ![image](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/1X/9b413df327de5cdd6baf669caab4aa2e818bf97c.jpeg)

---

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [October 14, 2022, 6:45pm UTC](https://forum.avidcnc.com/t/anyone-into-home-gyms/273/2 "2022-10-14T18:45:25Z")

</div>

Did you make all of that slot wall on your machine as well?

This looks better than a lot of public gyms!

---

<div class="post-metadata">

**Author:** ![MajorTendonitis](https://avatars.discourse-cdn.com/v4/letter/m/ebca7d/32.png) [@MajorTendonitis](https://forum.avidcnc.com/u/MajorTendonitis)\
**Post date:** [October 14, 2022, 6:55pm UTC](https://forum.avidcnc.com/t/anyone-into-home-gyms/273/3 "2022-10-14T18:55:00Z")

</div>

No that’s a product called StoreWall . Seen it being used in this same application on a gym forum one time, and it looked as though it would work well in a home gym environment.  
I just keep adding and upgrading as I go along , probably Asperger’s syndrom, autism , or ocd issues .  
I’m old , 61 , but still like to lift . I had a neck injury unrelated to lifting and have been out for over a year ,but plan on using it again soon.  
Was handy during Covid when all the gyms were shut down.

I’m really hoping to get my avid cnc built next spring , as I would like to make a plexi , diamond plate sign for my gym among other things