# ATC Hardware Installation Build

**URL:** <https://forum.avidcnc.com/t/atc-hardware-installation-build/2029>\
**Category:** Build Logs\
**Created:** [May 2, 2023, 5:39pm UTC](https://forum.avidcnc.com/t/atc-hardware-installation-build/2029 "2023-05-02T17:39:01Z")\
**Posts on this page:** 3\
**Page:** 2

<div class="post-metadata">

**Author:** ![Christopher](https://avatars.discourse-cdn.com/v4/letter/c/439d5e/32.png) [@Christopher](https://forum.avidcnc.com/u/Christopher)\
**Post date:** [April 30, 2024, 1:40pm UTC](https://forum.avidcnc.com/t/atc-hardware-installation-build/2029/22 "2024-04-30T13:40:33Z")

</div>

If wishes were horses: for those with extended Z axis and standard gantry height, the tool caddies could be mounted completely below the table surface, with a cover displaced reflexively by the moving gantry; with standard machines, there isn’t enough travel to completely put spindles out of harms way -but exposure could still be limited to ~an inch, maybe.

---

<div class="post-metadata">

**Author:** ![Christopher](https://avatars.discourse-cdn.com/v4/letter/c/439d5e/32.png) [@Christopher](https://forum.avidcnc.com/u/Christopher)\
**Post date:** [April 30, 2024, 1:42pm UTC](https://forum.avidcnc.com/t/atc-hardware-installation-build/2029/23 "2024-04-30T13:42:23Z")

</div>

A picture of your arraignment would be great.

---

<div class="post-metadata">

**Author:** ![LucasPe](https://avatars.discourse-cdn.com/v4/letter/l/3be4f8/32.png) [@LucasPe](https://forum.avidcnc.com/u/LucasPe)\
**Post date:** [August 30, 2024, 6:09pm UTC](https://forum.avidcnc.com/t/atc-hardware-installation-build/2029/24 "2024-08-30T18:09:16Z")

</div>

Hey Corbin, any way youd be willing to share the wiring connections of your spindle, i just got mine in and an automstion direct 7.5hp vfd. But i bought used so dont have any documentation on spindle and have been having trouble finding a manual for the spindle online

[Previous page](https://forum.avidcnc.com/t/atc-hardware-installation-build/2029.md?page=1)