# Avid CNC Automatic Tool Change System

**URL:** <https://forum.avidcnc.com/t/avid-cnc-automatic-tool-change-system/6324>\
**Category:** General Chat\
**Created:** [July 2, 2026, 6:21pm UTC](https://forum.avidcnc.com/t/avid-cnc-automatic-tool-change-system/6324 "2026-07-02T18:21:08Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![JeffsDesign](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jeffsdesign/32/5574_2.png) [@JeffsDesign](https://forum.avidcnc.com/u/JeffsDesign)\
**Post date:** [July 2, 2026, 6:21pm UTC](https://forum.avidcnc.com/t/avid-cnc-automatic-tool-change-system/6324/1 "2026-07-02T18:21:08Z")

</div>

> **[Avid CNC Automatic Tool Change System](https://www.avidcnc.com/support/instructions/atc/)**

I just found nine videos on the ATC software walkthrough just hit the playlist at the bottom of the screen.

That’s exactly what I was looking for well done AVID!!

---

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [July 4, 2026, 4:24pm UTC](https://forum.avidcnc.com/t/avid-cnc-automatic-tool-change-system/6324/2 "2026-07-04T16:24:37Z")

</div>

These are the rough draft videos. I’ll be making more comprehensive and well filmed ones in the coming weeks

---

<div class="post-metadata">

**Author:** ![Pertech](https://avatars.discourse-cdn.com/v4/letter/p/b19c9b/32.png) [@Pertech](https://forum.avidcnc.com/u/Pertech)\
**Post date:** [July 6, 2026, 1:11am UTC](https://forum.avidcnc.com/t/avid-cnc-automatic-tool-change-system/6324/3 "2026-07-06T01:11:28Z")

</div>

I watched these a couple of times hoping it would help get my Aux Box faster.

I’m not sure refined videos are needed. These are perfect.

I think we need to nominate Eric for an Oscar award!

---

<div class="post-metadata">

**Author:** ![JeffsDesign](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jeffsdesign/32/5574_2.png) [@JeffsDesign](https://forum.avidcnc.com/u/JeffsDesign)\
**Post date:** [July 25, 2026, 12:44am UTC](https://forum.avidcnc.com/t/avid-cnc-automatic-tool-change-system/6324/4 "2026-07-25T00:44:35Z")

</div>

Hey Eric , That’s a great addition to the videos. I was wondering how the pros set up the tool library 👍
