# Cam post processors

**URL:** <https://forum.avidcnc.com/t/cam-post-processors/4663>\
**Category:** General Chat\
**Created:** [April 29, 2025, 2:57pm UTC](https://forum.avidcnc.com/t/cam-post-processors/4663 "2025-04-29T14:57:01Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jaybird64](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jaybird64/32/4973_2.png) [@Jaybird64](https://forum.avidcnc.com/u/Jaybird64)\
**Post date:** [April 29, 2025, 2:57pm UTC](https://forum.avidcnc.com/t/cam-post-processors/4663/1 "2025-04-29T14:57:01Z")

</div>

I just want to be sure but is there any reason why I can’t use both processors, depending if I export toolpaths from Fusion360 or Vectric?

I’m using VCARVE PRO with limited 3D capabilities for the most part but also use Fusion360 for extensive 3D modeling.

---

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [April 29, 2025, 5:16pm UTC](https://forum.avidcnc.com/t/cam-post-processors/4663/2 "2025-04-29T17:16:33Z")

</div>

Are you asking if you can load G code from Fusion and Vectric? Since those are separate G code files, yes there’s no problem.

---

<div class="post-metadata">

**Author:** ![Jaybird64](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jaybird64/32/4973_2.png) [@Jaybird64](https://forum.avidcnc.com/u/Jaybird64)\
**Post date:** [April 30, 2025, 10:18am UTC](https://forum.avidcnc.com/t/cam-post-processors/4663/3 "2025-04-30T10:18:02Z")

</div>

Yes, I thought so but wasn’t for sure. Thanks!