# Cannot Reset the Top Graph view In Centroid

**URL:** <https://forum.avidcnc.com/t/cannot-reset-the-top-graph-view-in-centroid/6652>\
**Category:** General Chat\
**Created:** [October 9, 2026, 7:47pm UTC](https://forum.avidcnc.com/t/cannot-reset-the-top-graph-view-in-centroid/6652 "2026-10-09T19:47:46Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bob\_Kennedy](https://avatars.discourse-cdn.com/v4/letter/b/cab0a1/32.png) [@Bob\_Kennedy](https://forum.avidcnc.com/u/Bob_Kennedy)\
**Post date:** [October 9, 2026, 7:47pm UTC](https://forum.avidcnc.com/t/cannot-reset-the-top-graph-view-in-centroid/6652/1 "2026-10-09T19:47:46Z")

</div>

I have screwed up the top view of the graph view. I cannot figure out how to reset it so that you can see the entire sheet instead of the side. (Sorry for the dust)

Bob

 ![a76153ba-6a11-4afe-a915-dd329b506b78](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/c/c785afc94b4f23ce5e66f07cbc0dd308b67afdbd.jpeg)

---

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [October 9, 2026, 9:03pm UTC](https://forum.avidcnc.com/t/cannot-reset-the-top-graph-view-in-centroid/6652/2 "2026-10-09T21:03:21Z")

</div>

Looks like the actual issue is that your g code is posted wrong… unless you meant to cut a giant line like that.. Did you happen to use the Mach post by accident?

Post your g code here:

[www.g54.app](https://www.g54.app) and share a link back so I can check it out

---

<div class="post-metadata">

**Author:** ![Bob\_Kennedy](https://avatars.discourse-cdn.com/v4/letter/b/cab0a1/32.png) [@Bob\_Kennedy](https://forum.avidcnc.com/u/Bob_Kennedy)\
**Post date:** [October 11, 2026, 5:57pm UTC](https://forum.avidcnc.com/t/cannot-reset-the-top-graph-view-in-centroid/6652/4 "2026-10-11T17:57:39Z")

</div>

[Toolholder Ramps Narrow.txt](https://forum.avidcnc.com/uploads/short-url/sCDFhMwC2xy8eTSQ4GJGZgCXzmA.txt) (4.5 KB)

---

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [October 12, 2026, 12:13am UTC](https://forum.avidcnc.com/t/cannot-reset-the-top-graph-view-in-centroid/6652/5 "2026-10-12T00:13:32Z")

</div>

Looks like you used the Mach post instead of the EX post. That’s your issue