# Cigar and Whiskey serving tray

**URL:** <https://forum.avidcnc.com/t/cigar-and-whiskey-serving-tray/2491>\
**Category:** Projects\
**Created:** [September 25, 2023, 8:10pm UTC](https://forum.avidcnc.com/t/cigar-and-whiskey-serving-tray/2491 "2023-09-25T20:10:58Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![ronnierozier2](https://avatars.discourse-cdn.com/v4/letter/r/a183cd/32.png) [@ronnierozier2](https://forum.avidcnc.com/u/ronnierozier2)\
**Post date:** [September 25, 2023, 8:10pm UTC](https://forum.avidcnc.com/t/cigar-and-whiskey-serving-tray/2491/1 "2023-09-25T20:10:58Z")

</div>

A friend of mine enjoys on occasion a good cigar and a glass of whiskey so i made him this tray. the cigars are embedded in epoxy by the way…

let me know what you think fellow Avid’men

 ![cigar1](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/2/20dc83a7ddd654c996b46ff3a830cb28c66c4ffe.jpeg)  
 ![cigar2](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/3/30a7344e2aed076d9339574a78dc4def7bbd83ab.jpeg)

---

<div class="post-metadata">

**Author:** ![RickP](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/rickp/32/5667_2.png) [@RickP](https://forum.avidcnc.com/u/RickP)\
**Post date:** [September 26, 2023, 1:40am UTC](https://forum.avidcnc.com/t/cigar-and-whiskey-serving-tray/2491/2 "2023-09-26T01:40:06Z")

</div>

That looks great. What an awesome idea project. I may have to use this idea as a retirement gift for a coworker that is retiring next year.

---

<div class="post-metadata">

**Author:** ![ronnierozier2](https://avatars.discourse-cdn.com/v4/letter/r/a183cd/32.png) [@ronnierozier2](https://forum.avidcnc.com/u/ronnierozier2)\
**Post date:** [September 26, 2023, 2:40am UTC](https://forum.avidcnc.com/t/cigar-and-whiskey-serving-tray/2491/3 "2023-09-26T02:40:45Z")

</div>

Thanks Rick! I was just thinking what I could make my friend and this just sorta popped in my head.

---

<div class="post-metadata">

**Author:** ![gordo](https://avatars.discourse-cdn.com/v4/letter/g/f19dbf/32.png) [@gordo](https://forum.avidcnc.com/u/gordo)\
**Post date:** [September 26, 2023, 7:03pm UTC](https://forum.avidcnc.com/t/cigar-and-whiskey-serving-tray/2491/4 "2023-09-26T19:03:40Z")

</div>

Nice project and what an original idea. Would love to use your idea but don’t know anyone who likes a good cigar. Maybe some thinking will produce a new idea.

---

<div class="post-metadata">

**Author:** ![DavidsPostProcessor](https://avatars.discourse-cdn.com/v4/letter/d/76d3ee/32.png) [@DavidsPostProcessor](https://forum.avidcnc.com/u/DavidsPostProcessor)\
**Post date:** [September 26, 2023, 11:03pm UTC](https://forum.avidcnc.com/t/cigar-and-whiskey-serving-tray/2491/5 "2023-09-26T23:03:23Z")

</div>

Turned out nice. As a gag, throw in a little hammer for when inventory is low. “In case of emergency, break glass”. Bet him a bottle he can’t free them 😁

---

<div class="post-metadata">

**Author:** ![ronnierozier2](https://avatars.discourse-cdn.com/v4/letter/r/a183cd/32.png) [@ronnierozier2](https://forum.avidcnc.com/u/ronnierozier2)\
**Post date:** [September 26, 2023, 11:28pm UTC](https://forum.avidcnc.com/t/cigar-and-whiskey-serving-tray/2491/6 "2023-09-26T23:28:59Z")

</div>

Hahaha that’s a good idea friend! Thank you all for the positive feedback. I’m working on something else that’s pretty original, I’ll post when complete at the end of the week