# CNC DEPOT Users please read **URL:** \ **Category:** General Chat\ **Created:** [October 23, 2024, 5:33pm UTC](https://forum.avidcnc.com/t/cnc-depot-users-please-read/3830 "2024-10-23T17:33:52Z")\ **Posts on this page:** 13\ **Page:** 2
**Author:** ![corbin](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/corbin/32/2800_2.png) [@corbin](https://forum.avidcnc.com/u/corbin)\ **Post date:** [January 16, 2025, 5:14pm UTC](https://forum.avidcnc.com/t/cnc-depot-users-please-read/3830/21 "2025-01-16T17:14:21Z")
Also, for reference, here’s my guide (based on Eric’s): [https://www.corbinstreehouse.com/blog/centroid-acorn-atc-hardware-setup-for-the-avid-cnc-ex-controller/](https://www.corbinstreehouse.com/blog/centroid-acorn-atc-hardware-setup-for-the-avid-cnc-ex-controller/) ---
**Author:** ![jdurham](https://avatars.discourse-cdn.com/v4/letter/j/ccd318/32.png) [@jdurham](https://forum.avidcnc.com/u/jdurham)\ **Post date:** [February 10, 2025, 10:02pm UTC](https://forum.avidcnc.com/t/cnc-depot-users-please-read/3830/23 "2025-02-10T22:02:26Z")
I would like access to the guide as well. Thanks. ---
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [February 10, 2025, 10:03pm UTC](https://forum.avidcnc.com/t/cnc-depot-users-please-read/3830/24 "2025-02-10T22:03:05Z")
DM sent ---
**Author:** ![Connor](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/connor/32/3822_2.png) [@Connor](https://forum.avidcnc.com/u/Connor)\ **Post date:** [February 11, 2025, 5:02am UTC](https://forum.avidcnc.com/t/cnc-depot-users-please-read/3830/25 "2025-02-11T05:02:55Z")
Anyone using these spindles know how much the draw-up/knock-out distance is on the draw bar? I’ve been running mine for a while now, and had to adjust my macro to slowly raise the spindle as it releases. Getting something around 0.100" to 0.128" Talking with a friend, he said that most spindles only have 0.010" to 0.015" or so, and he could adjust his spindle to reduce this amount. ---
**Author:** ![djdelorie](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/djdelorie/32/515_2.png) [@djdelorie](https://forum.avidcnc.com/u/djdelorie)\ **Post date:** [February 11, 2025, 5:06am UTC](https://forum.avidcnc.com/t/cnc-depot-users-please-read/3830/26 "2025-02-11T05:06:29Z")
I have an S30C and my code does a 0.125 move in coordination with turning the drawbar on/off to limit abuse of the toolrack. ---
**Author:** ![KingFisher](https://avatars.discourse-cdn.com/v4/letter/k/bc8723/32.png) [@KingFisher](https://forum.avidcnc.com/u/KingFisher)\ **Post date:** [February 19, 2025, 12:39am UTC](https://forum.avidcnc.com/t/cnc-depot-users-please-read/3830/27 "2025-02-19T00:39:09Z")
> [@lazerwolf](#): > > @Eric Can you send me the guide please, thanks. @Eric Can you send me the guide please, thanks. ---
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [February 19, 2025, 1:17pm UTC](https://forum.avidcnc.com/t/cnc-depot-users-please-read/3830/28 "2025-02-19T13:17:48Z")
Done! ---
**Author:** ![Dallascww](https://avatars.discourse-cdn.com/v4/letter/d/3ec8ea/32.png) [@Dallascww](https://forum.avidcnc.com/u/Dallascww)\ **Post date:** [May 17, 2025, 9:09pm UTC](https://forum.avidcnc.com/t/cnc-depot-users-please-read/3830/29 "2025-05-17T21:09:09Z")
Can I get this info for the Cnc depot spindle ---
**Author:** ![MichaelR](https://avatars.discourse-cdn.com/v4/letter/m/6a8cbe/32.png) [@MichaelR](https://forum.avidcnc.com/u/MichaelR)\ **Post date:** [May 17, 2025, 11:56pm UTC](https://forum.avidcnc.com/t/cnc-depot-users-please-read/3830/30 "2025-05-17T23:56:34Z")
Eric, if you’d be kind enough to provide me with the documentation as well I’d appreciate it! ---
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [May 19, 2025, 1:11pm UTC](https://forum.avidcnc.com/t/cnc-depot-users-please-read/3830/31 "2025-05-19T13:11:04Z")
@Dallascww and @MichaelR check your DMs ---
**Author:** ![MichaelR](https://avatars.discourse-cdn.com/v4/letter/m/6a8cbe/32.png) [@MichaelR](https://forum.avidcnc.com/u/MichaelR)\ **Post date:** [May 19, 2025, 1:19pm UTC](https://forum.avidcnc.com/t/cnc-depot-users-please-read/3830/32 "2025-05-19T13:19:09Z")
Thank you sir! ---
**Author:** ![Dallascww](https://avatars.discourse-cdn.com/v4/letter/d/3ec8ea/32.png) [@Dallascww](https://forum.avidcnc.com/u/Dallascww)\ **Post date:** [May 19, 2025, 4:05pm UTC](https://forum.avidcnc.com/t/cnc-depot-users-please-read/3830/33 "2025-05-19T16:05:29Z")
Thank you ---
**Author:** ![Joshuabenji](https://avatars.discourse-cdn.com/v4/letter/j/bcef8e/32.png) [@Joshuabenji](https://forum.avidcnc.com/u/Joshuabenji)\ **Post date:** [June 3, 2025, 2:53am UTC](https://forum.avidcnc.com/t/cnc-depot-users-please-read/3830/34 "2025-06-03T02:53:33Z")
Hello @Eric I’ve just received my cnc depot spindle and avid ex control box. Can I get access to the guide you have reference above? [Previous page](https://forum.avidcnc.com/t/cnc-depot-users-please-read/3830.md?page=1)