# CNC12 Touch plate moves **URL:** \ **Category:** General Chat\ **Created:** [March 19, 2025, 8:15pm UTC](https://forum.avidcnc.com/t/cnc12-touch-plate-moves/4524 "2025-03-19T20:15:41Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Maui](https://avatars.discourse-cdn.com/v4/letter/m/ac8455/32.png) [@Maui](https://forum.avidcnc.com/u/Maui)\ **Post date:** [March 19, 2025, 8:15pm UTC](https://forum.avidcnc.com/t/cnc12-touch-plate-moves/4524/1 "2025-03-19T20:15:42Z")
Hello Team, Setup my new machine and after switching to MM’s the default touch plate feeds are supper slow with only 2.5mm of travel before the controller cancels the job. what are the recommended speeds so I can manually change the settings in the advanced config on the wizard. I’ve seen people mention 125mm/min for the rapid jog, what would slow jog be and clearance height? Cheers, Maui ---
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [March 20, 2025, 7:07pm UTC](https://forum.avidcnc.com/t/cnc12-touch-plate-moves/4524/2 "2025-03-20T19:07:07Z")
You may need to go into the wizard and “reset” your touch plate settings when you’re in metric. ---
**Author:** ![Maui](https://avatars.discourse-cdn.com/v4/letter/m/ac8455/32.png) [@Maui](https://forum.avidcnc.com/u/Maui)\ **Post date:** [March 21, 2025, 4:43am UTC](https://forum.avidcnc.com/t/cnc12-touch-plate-moves/4524/3 "2025-03-21T04:43:05Z")
yep, that worked well, thank you ---
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [March 21, 2025, 12:14pm UTC](https://forum.avidcnc.com/t/cnc12-touch-plate-moves/4524/4 "2025-03-21T12:14:20Z")
No problem!