# Customized ATC Setup **URL:** \ **Category:** General Chat\ **Created:** [August 1, 2026, 5:07am UTC](https://forum.avidcnc.com/t/customized-atc-setup/6400 "2026-08-01T05:07:03Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![jjneeb](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jjneeb/32/244_2.png) [@jjneeb](https://forum.avidcnc.com/u/jjneeb)\ **Post date:** [August 1, 2026, 5:07am UTC](https://forum.avidcnc.com/t/customized-atc-setup/6400/1 "2026-08-01T05:07:03Z")
My new ATC setup is up and running. I made my own tool rack because I needed the back of my machine clear, so I couldn’t use the AVID retractable rack. However, the software works great for my configuration as well. [![](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/7/7039c792ed34a138d5727f3fd318df0b5d6b5c8b.jpeg "My New AVID CNC ATC Setup") ](https://www.youtube.com/watch?v=ZEqqHdX1YI4) ---
**Author:** ![SkyScraperGuitars](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/skyscraperguitars/32/3492_2.png) [@SkyScraperGuitars](https://forum.avidcnc.com/u/SkyScraperGuitars)\ **Post date:** [August 1, 2026, 1:48pm UTC](https://forum.avidcnc.com/t/customized-atc-setup/6400/2 "2026-08-01T13:48:45Z")
Very cool. I’m guessing the folks at Avid put together a custom quote for all the pieces and parts since those items aren’t offered Ala carte yet..? I’m trying to sort out how I want to configure my ATC… I’ve got quite a few persnickety parameters I need to pay attention to for my workflow. ---
**Author:** ![jjneeb](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jjneeb/32/244_2.png) [@jjneeb](https://forum.avidcnc.com/u/jjneeb)\ **Post date:** [August 1, 2026, 9:05pm UTC](https://forum.avidcnc.com/t/customized-atc-setup/6400/3 "2026-08-01T21:05:54Z")
> [@SkyScraperGuitars](#): > > I’m guessing the folks at Avid put together a custom quote Yep, one of my favorite things about AVID is you can order whatever parts you need to go offroad a little. I got the auxbox, some extra tool holders, and the black plastic bin pockets from them. I already had the spindle. I also ordered the bin calibration caps and the air blast and tool presence sensor. If I had room for a bigger machine, I would have just gotten the full system…If only my wife would agree to park her car outside 🤣 ---
**Author:** ![NLE](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/nle/32/3880_2.png) [@NLE](https://forum.avidcnc.com/u/NLE)\ **Post date:** [August 2, 2026, 8:00pm UTC](https://forum.avidcnc.com/t/customized-atc-setup/6400/4 "2026-08-02T20:00:02Z")
great video!!