# Etsy laser test files **URL:** \ **Category:** Everything Lasers\ **Created:** [March 3, 2026, 9:31pm UTC](https://forum.avidcnc.com/t/etsy-laser-test-files/5847 "2026-03-03T21:31:32Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![JeffsDesign](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jeffsdesign/32/5574_2.png) [@JeffsDesign](https://forum.avidcnc.com/u/JeffsDesign)\ **Post date:** [March 3, 2026, 9:31pm UTC](https://forum.avidcnc.com/t/etsy-laser-test-files/5847/1 "2026-03-03T21:31:33Z")
I thought this was cool because if you’re new to the laser. They’re not very expensive at all but you do have little work to do as far as settings go.. ![Screenshot_20260303-154008.Photos](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/3/33f0372c656d68db774f539096de292a91784c58.jpeg) This is just one of a zillion of them for engraving and they have cutting too.. Jeff ---
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [March 3, 2026, 9:36pm UTC](https://forum.avidcnc.com/t/etsy-laser-test-files/5847/2 "2026-03-03T21:36:25Z")
This would make a great community file to share if someone wanted to make a VCarve file like this. (hint hint! 🙂 ---
**Author:** ![djdelorie](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/djdelorie/32/515_2.png) [@djdelorie](https://forum.avidcnc.com/u/djdelorie)\ **Post date:** [March 3, 2026, 9:43pm UTC](https://forum.avidcnc.com/t/etsy-laser-test-files/5847/3 "2026-03-03T21:43:06Z")
Isn’t that just the calibration print from lightburn? ---
**Author:** ![JeffsDesign](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jeffsdesign/32/5574_2.png) [@JeffsDesign](https://forum.avidcnc.com/u/JeffsDesign)\ **Post date:** [March 3, 2026, 9:48pm UTC](https://forum.avidcnc.com/t/etsy-laser-test-files/5847/4 "2026-03-03T21:48:29Z")
Not sure I don’t have lightburn. That’s a good idea Eric 😁 👍