# Fault reset not working **URL:** \ **Category:** General Chat\ **Tags:** cnc12\ **Created:** [January 20, 2025, 3:06pm UTC](https://forum.avidcnc.com/t/fault-reset-not-working/4268 "2025-01-20T15:06:56Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![cobymcconnell](https://avatars.discourse-cdn.com/v4/letter/c/34f0e0/32.png) [@cobymcconnell](https://forum.avidcnc.com/u/cobymcconnell)\ **Post date:** [January 20, 2025, 3:06pm UTC](https://forum.avidcnc.com/t/fault-reset-not-working/4268/1 "2025-01-20T15:06:56Z")
I’m going through the process to make the first cut on my 5x10 . In cnc12, there is a reset button that, when clicked, should change fault to no fault, But in my case, it doesn’t do anything. I have a Mitsubishi d700 VFD and changed the settings as the direction said, and still nothing; any recommendation would be appreciated I have put in a support ticket ---
**Author:** ![grossmsj](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/grossmsj/32/4903_2.png) [@grossmsj](https://forum.avidcnc.com/u/grossmsj)\ **Post date:** [January 20, 2025, 3:32pm UTC](https://forum.avidcnc.com/t/fault-reset-not-working/4268/2 "2025-01-20T15:32:15Z")
Have you tried cycling the E-Stop button? ---
**Author:** ![cobymcconnell](https://avatars.discourse-cdn.com/v4/letter/c/34f0e0/32.png) [@cobymcconnell](https://forum.avidcnc.com/u/cobymcconnell)\ **Post date:** [January 20, 2025, 3:50pm UTC](https://forum.avidcnc.com/t/fault-reset-not-working/4268/3 "2025-01-20T15:50:31Z")
Thank you so much. That worked. I must have hit it moving stuff around ---
**Author:** ![grossmsj](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/grossmsj/32/4903_2.png) [@grossmsj](https://forum.avidcnc.com/u/grossmsj)\ **Post date:** [January 20, 2025, 4:24pm UTC](https://forum.avidcnc.com/t/fault-reset-not-working/4268/4 "2025-01-20T16:24:19Z")
There are some fault conditions in CNC12 that have to be cleared via an e-stop. On my machine a spindle fault requires an e-stop to clear it. Since you are running Avid’s version, it might work differently. But I thought I’d offer it if it helps.