# Flipper Cart made out of old crates
**URL:** https://forum.avidcnc.com/t/flipper-cart-made-out-of-old-crates/1860
**Category:** Projects
**Created:** [March 16, 2023, 3:54pm UTC](https://forum.avidcnc.com/t/flipper-cart-made-out-of-old-crates/1860 "2023-03-16T15:54:02Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@Eric](https://forum.avidcnc.com/u/Eric)
#### Post date: [March 16, 2023, 3:54pm UTC](https://forum.avidcnc.com/t/flipper-cart-made-out-of-old-crates/1860/1 "2023-03-16T15:54:02Z")
I’ve been meaning to make one of these carts for my sander/router table for a long time now and I finally did it:
> **[New video by Eric Schimelpfenig](https://photos.app.goo.gl/sSRk1jz1ThyK5JdN7)**
I cribbed some ideas I’ve seen in some YouTube videos and made some adjustments to make it my own.
I cut the parts out of some scrap shipping crates I had around. That Omer nailer makes easy work out of this because you can kinda recklessly shoot composite nails into the sheets for hold down since I didn’t really care what it looked line in the end, I just wanted it functional.
---
### Author:  [@DavidsPostProcessor](https://forum.avidcnc.com/u/DavidsPostProcessor)
#### Post date: [March 16, 2023, 9:52pm UTC](https://forum.avidcnc.com/t/flipper-cart-made-out-of-old-crates/1860/2 "2023-03-16T21:52:06Z")
Pretty slick. I especially like that it was upcycled scraps, despite the appearance you are not lacking in materials to choose from.
Does Home Depot call you when they need more plywood??
---
### Author:  [@Eric](https://forum.avidcnc.com/u/Eric)
#### Post date: [March 17, 2023, 4:11pm UTC](https://forum.avidcnc.com/t/flipper-cart-made-out-of-old-crates/1860/3 "2023-03-17T16:11:23Z")
HAA, they should… Somehow by luck right before the pandemic I scored a stock of baltic birch for 1/3rd the pre-pandemic cost. I’m slowly working my way through it but it’s taken years.
I should probably sell it and retire early.