# For Sale: Benchtop Standard 2x3 - Western NC **URL:** \ **Category:** Buy & Sell\ **Created:** [March 6, 2023, 10:41pm UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816 "2023-03-06T22:41:17Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![DavidsPostProcessor](https://avatars.discourse-cdn.com/v4/letter/d/76d3ee/32.png) [@DavidsPostProcessor](https://forum.avidcnc.com/u/DavidsPostProcessor)\ **Post date:** [March 6, 2023, 10:41pm UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816/1 "2023-03-06T22:41:17Z")
Hello, I have a Benchtop Standard 2x3 purchased April, 2019 available for sale. Looking for $2800 OBO. I’m going with a PRO4848 and no longer need this. I’ve used it to make projects for myself, friends and family. This is not a worn down heavily-used machine. Located outside Asheville, NC. - 1 x Benchtop Standard 2436 2’ x 3’ CNC Machine Kit = $2,445.00 – Table Option - No aluminum extrusion table - 1 x 4-Drive DIY NEMA 23 Electronics Kit = $765.00 – Cable configuration (4) 12’ cables [recommended for Benchtop machines] – Motor Shaft Diameter 3/8" (Low Inductance 420 oz-in) - 1 x Dewalt DW618 Router Mount (CRP142-00-02) = $171.25 – with Base and Tramming Adapters – also fits Porter Cable 690/892 and Bosch 1617 * * * Sub-Total (in 2019): $3,381.25 As of March 2023, parts Sub-Total: $4,163.50 With or without DeWalt DW618 router With or without 2x6, 2x4 & 3/4" ply table/stand it’s sitting on I have set this up with a CNCdrive [UC300ETH-5LPT](http://shop.cncdrive.com/index.php?productID=790) ethernet motion controller and [UCCNC control software](http://shop.cncdrive.com/index.php?productID=494) on an old Windows 7 laptop (available). The license is tied to the motion controller ID and not the PC itself. It has 3 micro-switch home switches (X, Y1, Z), a makeshift touchplate and an E-stop button wired to the Leadshine MX4660. The gantry has a bright white LED light strip affixed. The electronics are screwed to a piece of MDF and mounted below the table overhang. If you prefer Avid’s Mach4 and ESS I can reconfigure this for you - we can discuss the details. If you’re just getting started and need some coaching after purchase - we can discuss. Regional delivery possible. It weighs around 200lbs as-built. Ideally it would be semi-disassembled to reduce bulk. Some minor assembly and tweaking is to be expected. I’m available on weekends. ---
**Author:** ![DavidsPostProcessor](https://avatars.discourse-cdn.com/v4/letter/d/76d3ee/32.png) [@DavidsPostProcessor](https://forum.avidcnc.com/u/DavidsPostProcessor)\ **Post date:** [March 6, 2023, 10:48pm UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816/2 "2023-03-06T22:48:09Z")
![IMG_0020 (2)](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/3/392601823cbc19c02566ed036fe647a0622c2a36.jpeg) ---
**Author:** ![bhuff](https://avatars.discourse-cdn.com/v4/letter/b/67e7ee/32.png) [@bhuff](https://forum.avidcnc.com/u/bhuff)\ **Post date:** [April 21, 2023, 4:56pm UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816/3 "2023-04-21T16:56:27Z")
Is this machine still available? Out of Raleigh area. ---
**Author:** ![DavidsPostProcessor](https://avatars.discourse-cdn.com/v4/letter/d/76d3ee/32.png) [@DavidsPostProcessor](https://forum.avidcnc.com/u/DavidsPostProcessor)\ **Post date:** [April 21, 2023, 5:24pm UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816/4 "2023-04-21T17:24:07Z")
Still available. Sent you a message. ---
**Author:** ![Erik](https://avatars.discourse-cdn.com/v4/letter/e/b5ac83/32.png) [@Erik](https://forum.avidcnc.com/u/Erik)\ **Post date:** [May 2, 2023, 4:20am UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816/5 "2023-05-02T04:20:25Z")
Hi David, I saw you are selling your machine to get a 4x4. I have a 5x5 for sale and am in the Raleigh area if you are interested. Thanks, Erik ---
**Author:** ![DavidsPostProcessor](https://avatars.discourse-cdn.com/v4/letter/d/76d3ee/32.png) [@DavidsPostProcessor](https://forum.avidcnc.com/u/DavidsPostProcessor)\ **Post date:** [May 2, 2023, 2:12pm UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816/7 "2023-05-02T14:12:33Z")
Hi @Erik - I certainly appreciate your situation. I’ve already got my 4x4, but if I run into anyone looking for a machine I’ll point them your direction. Best of luck ---
**Author:** ![Erik](https://avatars.discourse-cdn.com/v4/letter/e/b5ac83/32.png) [@Erik](https://forum.avidcnc.com/u/Erik)\ **Post date:** [May 2, 2023, 10:41pm UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816/8 "2023-05-02T22:41:36Z")
Thanks sir. Enjoy your new digs brother! ---
**Author:** ![Bigun913](https://avatars.discourse-cdn.com/v4/letter/b/5f8ce5/32.png) [@Bigun913](https://forum.avidcnc.com/u/Bigun913)\ **Post date:** [August 9, 2023, 5:00pm UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816/9 "2023-08-09T17:00:41Z")
Is this machine still available? Bigun913 ---
**Author:** ![DavidsPostProcessor](https://avatars.discourse-cdn.com/v4/letter/d/76d3ee/32.png) [@DavidsPostProcessor](https://forum.avidcnc.com/u/DavidsPostProcessor)\ **Post date:** [August 9, 2023, 9:52pm UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816/10 "2023-08-09T21:52:45Z")
Yes, still available. ---
**Author:** ![DavidsPostProcessor](https://avatars.discourse-cdn.com/v4/letter/d/76d3ee/32.png) [@DavidsPostProcessor](https://forum.avidcnc.com/u/DavidsPostProcessor)\ **Post date:** [September 23, 2023, 5:39pm UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816/11 "2023-09-23T17:39:53Z")
Price lowered to $2300. This is below the cost of the machine parts kit alone. ---
**Author:** ![DavidsPostProcessor](https://avatars.discourse-cdn.com/v4/letter/d/76d3ee/32.png) [@DavidsPostProcessor](https://forum.avidcnc.com/u/DavidsPostProcessor)\ **Post date:** [July 22, 2025, 6:27pm UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816/12 "2025-07-22T18:27:50Z")
Still looking to rehome this system. OBO I’ve now acquired an ESS and Mach4 license, so this is plug-and-play compatible with Avid’s Mach4 package (making this a [CRP100](https://www.avidcnc.com/support/instructions/software/mach4Configuration/#electronics_option)) if you prefer a supported combo (PC/Mach4-\>ESS-\>MX4660-\>Machine). I’m able to discuss pros/cons of either control package and answer any other questions you might have. ---
**Author:** ![STL3DP](https://avatars.discourse-cdn.com/v4/letter/s/ba9def/32.png) [@STL3DP](https://forum.avidcnc.com/u/STL3DP)\ **Post date:** [November 25, 2025, 8:47pm UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816/13 "2025-11-25T20:47:39Z")
Hey, is the machine still for sale? ---
**Author:** ![DavidsPostProcessor](https://avatars.discourse-cdn.com/v4/letter/d/76d3ee/32.png) [@DavidsPostProcessor](https://forum.avidcnc.com/u/DavidsPostProcessor)\ **Post date:** [November 25, 2025, 10:06pm UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816/14 "2025-11-25T22:06:39Z")
Yes, still available. ---
**Author:** ![STL3DP](https://avatars.discourse-cdn.com/v4/letter/s/ba9def/32.png) [@STL3DP](https://forum.avidcnc.com/u/STL3DP)\ **Post date:** [November 25, 2025, 10:19pm UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816/15 "2025-11-25T22:19:10Z")
Is there an email address I can contact you at to ask a few more questions? ---
**Author:** ![DavidsPostProcessor](https://avatars.discourse-cdn.com/v4/letter/d/76d3ee/32.png) [@DavidsPostProcessor](https://forum.avidcnc.com/u/DavidsPostProcessor)\ **Post date:** [November 26, 2025, 12:21am UTC](https://forum.avidcnc.com/t/for-sale-benchtop-standard-2x3-western-nc/1816/16 "2025-11-26T00:21:33Z")
Sent you a direct message with an email address.