# For Sale: Control System and NEMA 34 Steppers

**URL:** <https://forum.avidcnc.com/t/for-sale-control-system-and-nema-34-steppers/5086>\
**Category:** Buy & Sell\
**Created:** [August 11, 2025, 1:39pm UTC](https://forum.avidcnc.com/t/for-sale-control-system-and-nema-34-steppers/5086 "2025-08-11T13:39:41Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![paulk](https://avatars.discourse-cdn.com/v4/letter/p/67e7ee/32.png) [@paulk](https://forum.avidcnc.com/u/paulk)\
**Post date:** [August 11, 2025, 1:39pm UTC](https://forum.avidcnc.com/t/for-sale-control-system-and-nema-34-steppers/5086/1 "2025-08-11T13:39:41Z")

</div>

**For Sale:**

Avid Control System (Mach 4)

NEMA 34 Steppers w/ 4th Axis (I used for 2nd Z Axis)

Dual Router/Plasma Setup (Can be used as either)

$2,000 (I paid $4,000)

Purchased in 2021 and was only used for test cuts.

Does not include proximity sensors, I kept those when I did the servo upgrade.

Located near Atlanta, GA or can ship.

 ![IMG20250811085515](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/5/5ba04f78236aa1e35dd8ad32a7653caa0ccb1168.jpeg)

 ![IMG20250811085533](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/7/73a0c77ed10dcb408e47e9a7beeac7a9c9b3419e.jpeg)

 ![IMG20250811085747](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/1/1c3d0477d30b9cb4b5f3e5257727c6eb455f7339.jpeg)

 ![IMG20250811085752](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/8/8758c90ee4501f80abed151df2f8c6e9611f0726.jpeg)

 ![IMG20250811085825](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/2/25cc5567ce7499b62bae26d6f7842dc4e72a2d7e.jpeg)

---

<div class="post-metadata">

**Author:** ![cncdesigns706](https://avatars.discourse-cdn.com/v4/letter/c/ac8455/32.png) [@cncdesigns706](https://forum.avidcnc.com/u/cncdesigns706)\
**Post date:** [September 17, 2025, 8:52pm UTC](https://forum.avidcnc.com/t/for-sale-control-system-and-nema-34-steppers/5086/2 "2025-09-17T20:52:45Z")

</div>

Is this still available? I’m interested and if your are close enough I would like to come pickup this weekend.

---

<div class="post-metadata">

**Author:** ![paulk](https://avatars.discourse-cdn.com/v4/letter/p/67e7ee/32.png) [@paulk](https://forum.avidcnc.com/u/paulk)\
**Post date:** [September 17, 2025, 11:05pm UTC](https://forum.avidcnc.com/t/for-sale-control-system-and-nema-34-steppers/5086/3 "2025-09-17T23:05:01Z")

</div>

Sorry, it has sold.