# For Sell PRO60120

**URL:** <https://forum.avidcnc.com/t/for-sell-pro60120/4559>\
**Category:** Buy & Sell\
**Created:** [March 31, 2025, 5:52pm UTC](https://forum.avidcnc.com/t/for-sell-pro60120/4559 "2025-03-31T17:52:35Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![dionne](https://avatars.discourse-cdn.com/v4/letter/d/ba9def/32.png) [@dionne](https://forum.avidcnc.com/u/dionne)\
**Post date:** [March 31, 2025, 5:52pm UTC](https://forum.avidcnc.com/t/for-sell-pro60120/4559/1 "2025-03-31T17:52:35Z")

</div>

Asking $9,000.00, purchased May of 2017, new in the box, can provide original receipt, this forum would not let me upload the original receipt yet because I am too new of a user, will need to be picked up in Astoria, OR, I have all 18 boxes from when it was originally shipped, please reach out with any questions

---

<div class="post-metadata">

**Author:** ![WiscoWalnut](https://avatars.discourse-cdn.com/v4/letter/w/ee7513/32.png) [@WiscoWalnut](https://forum.avidcnc.com/u/WiscoWalnut)\
**Post date:** [April 8, 2025, 2:16pm UTC](https://forum.avidcnc.com/t/for-sell-pro60120/4559/2 "2025-04-08T14:16:19Z")

</div>

Interested, Did you sell already?

Questions:

What drive motors?  
What spindle?

I’m in Wisconsin so I wonder if shipping would be cheaper than driving out there?

---

<div class="post-metadata">

**Author:** ![WiscoWalnut](https://avatars.discourse-cdn.com/v4/letter/w/ee7513/32.png) [@WiscoWalnut](https://forum.avidcnc.com/u/WiscoWalnut)\
**Post date:** [April 8, 2025, 7:09pm UTC](https://forum.avidcnc.com/t/for-sell-pro60120/4559/4 "2025-04-08T19:09:43Z")

</div>

Please do

---

<div class="post-metadata">

**Author:** ![dionne](https://avatars.discourse-cdn.com/v4/letter/d/ba9def/32.png) [@dionne](https://forum.avidcnc.com/u/dionne)\
**Post date:** [April 8, 2025, 8:38pm UTC](https://forum.avidcnc.com/t/for-sell-pro60120/4559/5 "2025-04-08T20:38:06Z")

</div>

I will need your email. This community forum says I’m too new of a user, it won’t allow me to upload any documents yet.

---

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [April 8, 2025, 8:44pm UTC](https://forum.avidcnc.com/t/for-sell-pro60120/4559/6 "2025-04-08T20:44:04Z")

</div>

I updated your account so you can upload now

---

<div class="post-metadata">

**Author:** ![dionne](https://avatars.discourse-cdn.com/v4/letter/d/ba9def/32.png) [@dionne](https://forum.avidcnc.com/u/dionne)\
**Post date:** [April 8, 2025, 8:46pm UTC](https://forum.avidcnc.com/t/for-sell-pro60120/4559/7 "2025-04-08T20:46:29Z")

</div>

Thank you Eric

---

<div class="post-metadata">

**Author:** ![dionne](https://avatars.discourse-cdn.com/v4/letter/d/ba9def/32.png) [@dionne](https://forum.avidcnc.com/u/dionne)\
**Post date:** [April 8, 2025, 9:02pm UTC](https://forum.avidcnc.com/t/for-sell-pro60120/4559/8 "2025-04-08T21:02:38Z")

</div>

[CNC.pdf](https://forum.avidcnc.com/uploads/short-url/7iPNchVQ1JYulZ7rToHIYT1vGY6.pdf) (865.9 KB)  
Here is the original invoice