# FS: OneGuyInAShop Dust Boot for 3 HP (80 mm)

**URL:** <https://forum.avidcnc.com/t/fs-oneguyinashop-dust-boot-for-3-hp-80-mm/4460>\
**Category:** Buy & Sell\
**Created:** [March 4, 2025, 1:41am UTC](https://forum.avidcnc.com/t/fs-oneguyinashop-dust-boot-for-3-hp-80-mm/4460 "2025-03-04T01:41:20Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![berrianmtn](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/berrianmtn/32/4852_2.png) [@berrianmtn](https://forum.avidcnc.com/u/berrianmtn)\
**Post date:** [March 4, 2025, 1:41am UTC](https://forum.avidcnc.com/t/fs-oneguyinashop-dust-boot-for-3-hp-80-mm/4460/1 "2025-03-04T01:41:20Z")

</div>

Selling a brand new condition dust boot created by OneGuyInAShop ([https://www.etsy.com/listing/1077456686/avid-3hp-vfd-79mm-dust-boot?ref=shop\_home\_active\_4&sts=1&logging\_key=4dda7d5e25557526a09b827d0e7541faca261a61%3A1077456686](https://www.etsy.com/listing/1077456686/avid-3hp-vfd-79mm-dust-boot?ref=shop_home_active_4&sts=1&logging_key=4dda7d5e25557526a09b827d0e7541faca261a61%3A1077456686)). Includes two extra replacement bristle frames that I purchased in addition to the boot. Accommodates a 4 inch hose.

Purchased in 2021 but never installed. I used a custom built solution instead. It appears to be very well designed and fabricated.

$100 plus actual shipping charges.

 ![IMG_1031 2](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/e/ebfd4424e51ce038180857ef888a068fdc464b6c.jpeg)

---

<div class="post-metadata">

**Author:** ![nateD](https://avatars.discourse-cdn.com/v4/letter/n/ce7236/32.png) [@nateD](https://forum.avidcnc.com/u/nateD)\
**Post date:** [April 23, 2025, 11:16am UTC](https://forum.avidcnc.com/t/fs-oneguyinashop-dust-boot-for-3-hp-80-mm/4460/2 "2025-04-23T11:16:19Z")

</div>

Where are you located?

---

<div class="post-metadata">

**Author:** ![berrianmtn](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/berrianmtn/32/4852_2.png) [@berrianmtn](https://forum.avidcnc.com/u/berrianmtn)\
**Post date:** [April 23, 2025, 1:53pm UTC](https://forum.avidcnc.com/t/fs-oneguyinashop-dust-boot-for-3-hp-80-mm/4460/3 "2025-04-23T13:53:52Z")

</div>

Denver area

---

<div class="post-metadata">

**Author:** ![nateD](https://avatars.discourse-cdn.com/v4/letter/n/ce7236/32.png) [@nateD](https://forum.avidcnc.com/u/nateD)\
**Post date:** [April 23, 2025, 3:09pm UTC](https://forum.avidcnc.com/t/fs-oneguyinashop-dust-boot-for-3-hp-80-mm/4460/4 "2025-04-23T15:09:40Z")

</div>

Thanks! I don’t own a Avid yet, but I’m kind of looking at one so I was curious about your location. I hear this boot is the best or no?