# FS: Pro 6060 8/12 Z PP NEMA 34 and Hitco 4hp SOLD

**URL:** <https://forum.avidcnc.com/t/fs-pro-6060-8-12-z-pp-nema-34-and-hitco-4hp-sold/1974>\
**Category:** Buy & Sell\
**Created:** [April 16, 2023, 7:21pm UTC](https://forum.avidcnc.com/t/fs-pro-6060-8-12-z-pp-nema-34-and-hitco-4hp-sold/1974 "2023-04-16T19:21:25Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Erik](https://avatars.discourse-cdn.com/v4/letter/e/b5ac83/32.png) [@Erik](https://forum.avidcnc.com/u/Erik)\
**Post date:** [April 16, 2023, 7:21pm UTC](https://forum.avidcnc.com/t/fs-pro-6060-8-12-z-pp-nema-34-and-hitco-4hp-sold/1974/1 "2023-04-16T19:21:25Z")

</div>

Low mileage Pro6060 with plug and play Nema34 and 4hp set up. 8/12 Z which is great for retracting those extra long bits. Factory leg kit and vertical work holding.  
Only seen light hobby use located in Apex NC. See my Marketplace listing here:

> **[Log into Facebook](https://www.facebook.com/marketplace/item/1395709434511851/?mibextid=dXMIcH)**
>
> Log into Facebook to start sharing and connecting with your friends, family, and people you know.

Asking $11000

Thanks,  
Erik

---

<div class="post-metadata">

**Author:** ![Erik](https://avatars.discourse-cdn.com/v4/letter/e/b5ac83/32.png) [@Erik](https://forum.avidcnc.com/u/Erik)\
**Post date:** [April 30, 2023, 11:56am UTC](https://forum.avidcnc.com/t/fs-pro-6060-8-12-z-pp-nema-34-and-hitco-4hp-sold/1974/2 "2023-04-30T11:56:07Z")

</div>

Hi All,  
Must be asking a little too much so have decided to lower the price to 11k. Very very low hours.

---

<div class="post-metadata">

**Author:** ![Christopher](https://avatars.discourse-cdn.com/v4/letter/c/439d5e/32.png) [@Christopher](https://forum.avidcnc.com/u/Christopher)\
**Post date:** [May 13, 2023, 2:10pm UTC](https://forum.avidcnc.com/t/fs-pro-6060-8-12-z-pp-nema-34-and-hitco-4hp-sold/1974/3 "2023-05-13T14:10:20Z")

</div>

The FB listing is removed- has this sold?

---

<div class="post-metadata">

**Author:** ![Erik](https://avatars.discourse-cdn.com/v4/letter/e/b5ac83/32.png) [@Erik](https://forum.avidcnc.com/u/Erik)\
**Post date:** [May 13, 2023, 3:06pm UTC](https://forum.avidcnc.com/t/fs-pro-6060-8-12-z-pp-nema-34-and-hitco-4hp-sold/1974/4 "2023-05-13T15:06:08Z")

</div>

No sorry I refreshed the listing and must have broken the link. You can call me if you want. I am working today but text works also. 3-1-5-4-5-0-1-1-1-9  
Thanks  
Erik