# Fusion 360 CAD CAM

**URL:** <https://forum.avidcnc.com/t/fusion-360-cad-cam/1003>\
**Category:** General Chat\
**Created:** [October 20, 2022, 5:41pm UTC](https://forum.avidcnc.com/t/fusion-360-cad-cam/1003 "2022-10-20T17:41:43Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![Stephen](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/stephen/32/2569_2.png) [@Stephen](https://forum.avidcnc.com/u/Stephen)\
**Post date:** [October 21, 2022, 12:53pm UTC](https://forum.avidcnc.com/t/fusion-360-cad-cam/1003/6 "2022-10-21T12:53:22Z")

</div>

The chair I posted elsewhere ([Panel Chair in ash](https://forum.avidcnc.com/t/panel-chair-in-ash/809)) used Fusion 360. Here’s a front leg pocket toolpath:

 ![PanelChairRailToolpaths](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/1X/3993b814e5504e0f8316684859acb709df8027d1.jpeg)

---

_[View the full topic](https://forum.avidcnc.com/t/fusion-360-cad-cam/1003)._