# Gratuitous plasma footage

**URL:** <https://forum.avidcnc.com/t/gratuitous-plasma-footage/4364>\
**Category:** General Chat\
**Created:** [February 11, 2025, 6:15pm UTC](https://forum.avidcnc.com/t/gratuitous-plasma-footage/4364 "2025-02-11T18:15:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [February 11, 2025, 6:15pm UTC](https://forum.avidcnc.com/t/gratuitous-plasma-footage/4364/1 "2025-02-11T18:15:54Z")

</div>

Having a little fun editing some plasma shots that I had from testing together:

[![](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/2/2104a2a08449a7dad75ef9050a105556795f0ae9.jpeg "Cutting steel on the Avid Plasma") ](https://www.youtube.com/watch?v=b38rl8Zmg9E)

This was all done with EX

---

<div class="post-metadata">

**Author:** ![Bernmc](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/bernmc/32/826_2.png) [@Bernmc](https://forum.avidcnc.com/u/Bernmc)\
**Post date:** [February 11, 2025, 7:11pm UTC](https://forum.avidcnc.com/t/gratuitous-plasma-footage/4364/2 "2025-02-11T19:11:14Z")

</div>

link doesn’t work for me

---

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [February 11, 2025, 7:26pm UTC](https://forum.avidcnc.com/t/gratuitous-plasma-footage/4364/3 "2025-02-11T19:26:20Z")

</div>

Should be good now!