# Heart Box - Cherry with Purple Epoxy

**URL:** <https://forum.avidcnc.com/t/heart-box-cherry-with-purple-epoxy/1930>\
**Category:** Projects\
**Created:** [April 4, 2023, 4:29am UTC](https://forum.avidcnc.com/t/heart-box-cherry-with-purple-epoxy/1930 "2023-04-04T04:29:40Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![da-kengineer-meister](https://avatars.discourse-cdn.com/v4/letter/d/f1d935/32.png) [@da-kengineer-meister](https://forum.avidcnc.com/u/da-kengineer-meister)\
**Post date:** [April 5, 2023, 1:13am UTC](https://forum.avidcnc.com/t/heart-box-cherry-with-purple-epoxy/1930/4 "2023-04-05T01:13:13Z")

</div>

Here were a couple I posted to the forum, each of these have two different in-lay pours that I cut then poured then machined through both the epoxy and wood to sculpt the surface, and then a third thick clear pour on top.  
[Entryway table](https://forum.avidcnc.com/t/3d-sculpted-teak-epoxy-steel-entryway-table/1817)  
[Entryway bench seat](https://forum.avidcnc.com/t/3d-sculpted-inlaid-wooden-steel-entry-way-bench/1552/5)

I’ve got a couple other projects that I did on the AVIDcnc in wood and epoxy. Mostly similar to the two above though, so I didn’t post them so as to not to bore ppl with a nearly identical repeat. They were just variations on a theme for other ppl.

A lot of my other work with epoxy has been cutting simple aluminum 2-part molds making parts for the robots.

 ![q40_122_001196](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/1/1e713d727a8043672ad6c693ee9d80ad3e6334b3.jpeg)  
 ![q40_132_0021270](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/d/d0247e63d123b5cc996009339fb16127285ac6ec.jpeg)

 ![q40_134_00021](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/7/7d7a1cfaf702b07e8691c3d6d55ca01d12f41534.jpeg)  
 ![q40_134_00053](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/3/33f1b03e580104f42621ca77a268219b819b09f6.jpeg)  
 ![q40_134_00068](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/c/c006dc7b07d1c36852efe81e799f19c533674e1b.jpeg)  
 ![q40_134_00219](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/7/73422355a96a409153745cd7956195632e96defc.jpeg)

 ![q40_134_00295](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/1/13161e804e738d60c80db89825f15489cd3ce941.jpeg)  
 ![q40_134_00328](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/1/18ffa9ad8234b1f8ad388377eb16cd39c5b05126.jpeg)

That gives you and idea at least. I use a similar process to make rubberized flexible parts as well…

---

_[View the full topic](https://forum.avidcnc.com/t/heart-box-cherry-with-purple-epoxy/1930)._