# Limits error ………

**URL:** <https://forum.avidcnc.com/t/limits-error/3225>\
**Category:** General Chat\
**Created:** [May 19, 2024, 10:38pm UTC](https://forum.avidcnc.com/t/limits-error/3225 "2024-05-19T22:38:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ivanpalomoTK](https://avatars.discourse-cdn.com/v4/letter/i/5f8ce5/32.png) [@ivanpalomoTK](https://forum.avidcnc.com/u/ivanpalomoTK)\
**Post date:** [May 19, 2024, 10:38pm UTC](https://forum.avidcnc.com/t/limits-error/3225/1 "2024-05-19T22:38:09Z")

</div>

Hi, I have the following issue.

The Z limit works, the X limit works, but the Y limits when setting all the axes to home. at the moment of reaching Y’s home plate and it doesn’t stop.

 ![IMG_8074](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/b/bdb52d5dcdbc49593301744653964d2edec165cc.jpeg)  
 ![IMG_8073](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/f/fc9763e0b1261127902cde4ccc9106c4d6f4ad87.jpeg)

---

<div class="post-metadata">

**Author:** ![jjneeb](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jjneeb/32/244_2.png) [@jjneeb](https://forum.avidcnc.com/u/jjneeb)\
**Post date:** [May 19, 2024, 11:34pm UTC](https://forum.avidcnc.com/t/limits-error/3225/2 "2024-05-19T23:34:27Z")

</div>

Hi Ivan,

So all the sensors work correctly for homing, but then after homing and the soft limits are enabled, the Y axis doesn’t stop and can be jogged right into the hard stop, correct?

Which end of the Y travel does this happen on?

Can you share with us a screenshot of this tab from Mach4 so we can see your limits setup?

 ![image](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/8/8f572a4010ab56a048bba061d485ed5e894548f1.png)