# Looking for the maker of this dust boot **URL:** \ **Category:** General Chat\ **Created:** [October 28, 2022, 12:49pm UTC](https://forum.avidcnc.com/t/looking-for-the-maker-of-this-dust-boot/1077 "2022-10-28T12:49:10Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![ljplum12](https://avatars.discourse-cdn.com/v4/letter/l/258eb7/32.png) [@ljplum12](https://forum.avidcnc.com/u/ljplum12)\ **Post date:** [October 28, 2022, 12:49pm UTC](https://forum.avidcnc.com/t/looking-for-the-maker-of-this-dust-boot/1077/1 "2022-10-28T12:49:10Z")
I got my machine used with this dust collector setup, and I’d like to get a backup boot. It is 3D printed. Does anyone recognize it and know where I could order it from? ![IMG_20221027_163340](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/1X/317e0857d434f8bad4c77f7e11d7cf0b0116f8c4.jpeg) ---
**Author:** ![greenleaf](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@greenleaf](https://forum.avidcnc.com/u/greenleaf)\ **Post date:** [October 28, 2022, 9:10pm UTC](https://forum.avidcnc.com/t/looking-for-the-maker-of-this-dust-boot/1077/2 "2022-10-28T21:10:43Z")
That looks extremely similar to this one: > **[Avid CNC dust boot (double sided) by ecproxy](https://www.thingiverse.com/thing:5161243)** > > This is a remix of iporty's great dust boot. I have added a block to the back to use a 35mm m8 bolt to secure the top split to the z axis for extra rigidity. I also have an alternate dust boot attachment. Instead of routing the suction to right... I think there are lots of places you can get the plastic parts printed from, but you may have to glue to the magnets and bristle strip yourself. ---
**Author:** ![ljplum12](https://avatars.discourse-cdn.com/v4/letter/l/258eb7/32.png) [@ljplum12](https://forum.avidcnc.com/u/ljplum12)\ **Post date:** [October 28, 2022, 10:26pm UTC](https://forum.avidcnc.com/t/looking-for-the-maker-of-this-dust-boot/1077/3 "2022-10-28T22:26:27Z")
That is closer, but I think that one uses smaller tubes. I’ll check the measurements. The magnet configuration is a little different also, mine has 4 below the motor. ---
**Author:** ![CedarMtMandolin](https://avatars.discourse-cdn.com/v4/letter/c/c4cdca/32.png) [@CedarMtMandolin](https://forum.avidcnc.com/u/CedarMtMandolin)\ **Post date:** [October 28, 2022, 11:39pm UTC](https://forum.avidcnc.com/t/looking-for-the-maker-of-this-dust-boot/1077/4 "2022-10-28T23:39:58Z")
Try looking at ‘KentCNC. He makes a good dust boot that is mag mounted. I’ve used them for years and are very happy > **[KentCNC](https://www.kentcnc.net/nc)** > > KentCNC 210-695-0169 ---
**Author:** ![GeorgeM](https://avatars.discourse-cdn.com/v4/letter/g/8baadc/32.png) [@GeorgeM](https://forum.avidcnc.com/u/GeorgeM)\ **Post date:** [October 29, 2022, 12:53pm UTC](https://forum.avidcnc.com/t/looking-for-the-maker-of-this-dust-boot/1077/5 "2022-10-29T12:53:23Z")
If your interested in a “KentCNC” boot, pm me. I have a used one that I will sell for very reasonable price. It is made for 100mm (router) but I made an adapter for my spindle (80mm). I used it for a couple of years until I went with a different design recently. George M ---
**Author:** ![CedarMtMandolin](https://avatars.discourse-cdn.com/v4/letter/c/c4cdca/32.png) [@CedarMtMandolin](https://forum.avidcnc.com/u/CedarMtMandolin)\ **Post date:** [October 29, 2022, 3:00pm UTC](https://forum.avidcnc.com/t/looking-for-the-maker-of-this-dust-boot/1077/6 "2022-10-29T15:00:23Z")
George, No I have been using one for years. I was recommending it. ---
**Author:** ![TwigStudio](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/twigstudio/32/3152_2.png) [@TwigStudio](https://forum.avidcnc.com/u/TwigStudio)\ **Post date:** [October 29, 2022, 5:46pm UTC](https://forum.avidcnc.com/t/looking-for-the-maker-of-this-dust-boot/1077/7 "2022-10-29T17:46:39Z")
I have this one. it works great. The design is not exactly the same as your photo, but it’s close. might be the same guy. > **[Dust Shoe for Avid / Hiteco 4hp 75mm Spindle Sidewinder Dust - Etsy Canada](https://www.etsy.com/ca/listing/1172353922/dust-shoe-for-avid-hiteco-4hp-75mm?click_key=eb1f8a41d251aa237af8aa7f6ebbd34b4c4b9ca7%3A1172353922&click_sum=2e1a2e4c&ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=cnc%2Bdust%2Bboot&ref=sr_gallery-1-1&frs=1&cns=1&col=1&sts=1)** > > This Equipment & Machines item by RawWoodworking2020 has 3 favorites from Etsy shoppers. Ships from Canada. Listed on 13 Oct, 2022 ---
**Author:** ![SMdesign](https://avatars.discourse-cdn.com/v4/letter/s/50afbb/32.png) [@SMdesign](https://forum.avidcnc.com/u/SMdesign)\ **Post date:** [October 29, 2022, 8:30pm UTC](https://forum.avidcnc.com/t/looking-for-the-maker-of-this-dust-boot/1077/8 "2022-10-29T20:30:10Z")
That boot is available on sing a verse for download just search for avid CNC dust boot