# Mach 4 Jogging issue - need help **URL:** \ **Category:** General Chat\ **Created:** [February 1, 2025, 12:58pm UTC](https://forum.avidcnc.com/t/mach-4-jogging-issue-need-help/4326 "2025-02-01T12:58:18Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Maxtlg](https://avatars.discourse-cdn.com/v4/letter/m/f9ae1b/32.png) [@Maxtlg](https://forum.avidcnc.com/u/Maxtlg)\ **Post date:** [February 1, 2025, 12:58pm UTC](https://forum.avidcnc.com/t/mach-4-jogging-issue-need-help/4326/1 "2025-02-01T12:58:18Z")
I was doing a cut yesterday on my avid 4x8 and had to hit estop. After I reset the machine I cannot manually jog the machine with the keyboard or with the Mach 4 buttons on screen. I am not on any limit switches and i have tried axies override. It will still let me home the machine. I also have a Mach 4 pendent and it will let me jog the machine with that which seems odd. Have tried power reboot and nothing. Any help would be much appreciated! ---
**Author:** ![Stephen](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/stephen/32/2569_2.png) [@Stephen](https://forum.avidcnc.com/u/Stephen)\ **Post date:** [February 1, 2025, 3:41pm UTC](https://forum.avidcnc.com/t/mach-4-jogging-issue-need-help/4326/2 "2025-02-01T15:41:11Z")
The fact that it didn’t start working again after a reset suggests something in your Mach 4 setup became corrupted. You can find profile restore instructions [here](https://www.avidcnc.com/support/instructions/software/mach4UsersGuide/#mach4-troubleshooting). Setting up a call with Avid’s support team is also an option. They are very capable and helpful. Welcome to the forum! ---
**Author:** ![Maxtlg](https://avatars.discourse-cdn.com/v4/letter/m/f9ae1b/32.png) [@Maxtlg](https://forum.avidcnc.com/u/Maxtlg)\ **Post date:** [February 3, 2025, 11:28am UTC](https://forum.avidcnc.com/t/mach-4-jogging-issue-need-help/4326/3 "2025-02-03T11:28:28Z")
I followed the link you sent and I am back in action. Really appreciate the help!! Thanks!