# Metric settings with EX controller, a few more things to watch out for **URL:** \ **Category:** General Chat\ **Created:** [November 3, 2024, 7:11am UTC](https://forum.avidcnc.com/t/metric-settings-with-ex-controller-a-few-more-things-to-watch-out-for/3886 "2024-11-03T07:11:09Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![ESchenk](https://avatars.discourse-cdn.com/v4/letter/e/aca169/32.png) [@ESchenk](https://forum.avidcnc.com/u/ESchenk)\ **Post date:** [November 3, 2024, 7:11am UTC](https://forum.avidcnc.com/t/metric-settings-with-ex-controller-a-few-more-things-to-watch-out-for/3886/1 "2024-11-03T07:11:09Z")
I normally work in metric, so I switched the machine over to metric. I ran into the previously reported issue with homing, and made a local change to my homing code. I expect I’ll be able to throw this away as soon as Avid makes their next update. The other issue I ran into that is that the Avid touch plate also needs to have it’s dimensions restated in metric in the Avid setup. I just went in and did the conversion by hand, but it might be nice to rewrite things a bit so the units are clear in the input dialogue and handled correctly when the user switches over to metric settings. You also want to watch out that you fix all the various clearances that are put in at run time, as the default inch based values will not be what you want when you go to run the touch plate probing. Hopefully this also save someone else a bit of trouble. Cheers, Eric ---
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [November 3, 2024, 8:52am UTC](https://forum.avidcnc.com/t/metric-settings-with-ex-controller-a-few-more-things-to-watch-out-for/3886/2 "2024-11-03T08:52:07Z")
Yup! We have a fix nearly done for this. It’ll be out very soon ---
**Author:** ![nmathon](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/nmathon/32/2372_2.png) [@nmathon](https://forum.avidcnc.com/u/nmathon)\ **Post date:** [November 19, 2024, 11:14am UTC](https://forum.avidcnc.com/t/metric-settings-with-ex-controller-a-few-more-things-to-watch-out-for/3886/3 "2024-11-19T11:14:26Z")
Hi @Eric , Any news on that fix ? I don’t understand how you can live in an imperial world 😅 Thanks ---
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [November 19, 2024, 1:11pm UTC](https://forum.avidcnc.com/t/metric-settings-with-ex-controller-a-few-more-things-to-watch-out-for/3886/4 "2024-11-19T13:11:34Z")
We’re really close. Give it a day or two. ---
**Author:** ![nmathon](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/nmathon/32/2372_2.png) [@nmathon](https://forum.avidcnc.com/u/nmathon)\ **Post date:** [November 19, 2024, 1:52pm UTC](https://forum.avidcnc.com/t/metric-settings-with-ex-controller-a-few-more-things-to-watch-out-for/3886/5 "2024-11-19T13:52:52Z")
Great ! Thanks ---
**Author:** ![nmathon](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/nmathon/32/2372_2.png) [@nmathon](https://forum.avidcnc.com/u/nmathon)\ **Post date:** [November 28, 2024, 8:11am UTC](https://forum.avidcnc.com/t/metric-settings-with-ex-controller-a-few-more-things-to-watch-out-for/3886/6 "2024-11-28T08:11:39Z")
Hi @Eric, Any updates? It’s been a month since this issue was raised, and I’m losing a lot of time because of it. Are you encountering a major challenge on your end? ---
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [November 28, 2024, 12:09pm UTC](https://forum.avidcnc.com/t/metric-settings-with-ex-controller-a-few-more-things-to-watch-out-for/3886/7 "2024-11-28T12:09:33Z")
No the issue is solved. Centroid is about to release a nice update that includes a lot of other features that users have been requesting. Once we get that we will wrap it up with our changes and release. My recommendation is to wait for that. I think you’ll like the new features.