# New place to hang the track

**URL:** <https://forum.avidcnc.com/t/new-place-to-hang-the-track/6096>\
**Category:** Off Topic\
**Created:** [May 3, 2026, 6:34pm UTC](https://forum.avidcnc.com/t/new-place-to-hang-the-track/6096 "2026-05-03T18:34:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JeffsDesign](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jeffsdesign/32/5574_2.png) [@JeffsDesign](https://forum.avidcnc.com/u/JeffsDesign)\
**Post date:** [May 3, 2026, 6:34pm UTC](https://forum.avidcnc.com/t/new-place-to-hang-the-track/6096/1 "2026-05-03T18:34:34Z")

</div>

I didn’t want to drill more holes in the garage door so I printed out couple of hangers and a new hose and cord guide and mounted it on the bare side of the CNC 😁

 ![IMG_20260503_141249621_HDR~2](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/d/d3ae47257fbafa565ebcbd02f0120d26875b6e58.jpeg)

---

<div class="post-metadata">

**Author:** ![JeffsDesign](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jeffsdesign/32/5574_2.png) [@JeffsDesign](https://forum.avidcnc.com/u/JeffsDesign)\
**Post date:** [May 10, 2026, 1:55am UTC](https://forum.avidcnc.com/t/new-place-to-hang-the-track/6096/2 "2026-05-10T01:55:49Z")

</div>

Will guys that may have been a good idea I still might put those brackets for the track back on later but I boxed myself in since the other side of the machine has the electrical boxes and the front of the machine has more of a permanent fixture for vertical table I have no access to the things I put under the machine so I did a little rearranging of the bracing. I needed a access point. Machine still feels rock solid this way.

 ![IMG_20260509_205249702_HDR](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/2/2ce324fc5e93371ecb21dcdaea28d7a71e77fd88.jpeg)

This should be okay no?