# Pro60120 $13000 **URL:** \ **Category:** Buy & Sell\ **Created:** [January 7, 2026, 10:34pm UTC](https://forum.avidcnc.com/t/pro60120-13000/5630 "2026-01-07T22:34:35Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![JayD](https://avatars.discourse-cdn.com/v4/letter/j/e36b37/32.png) [@JayD](https://forum.avidcnc.com/u/JayD)\ **Post date:** [January 7, 2026, 10:34pm UTC](https://forum.avidcnc.com/t/pro60120-13000/5630/1 "2026-01-07T22:34:35Z")
PRO60120 5’ x 10’ CNC Router Kit - Version: Nema 34 1/2" Shaft Compatible - Z-Axis Travel / Gantry Height: 8" / 8" - Gantry Width: Standard 1 x Plug and Play NEMA 34 CNC Control System - Compatibility Option: CRP800 (Standard) 1 x Pepperl + Fuchs Proximity Sensor Kit - Sensor Configuration: PRO CNC (machines larger than 5’ x 5’) 1 x 8.7 HP Spindle Tramming Mount 1 x Auto Z and Corner Finding T ouch Plate 1 x Mach4 CNC Control Software 1 x ER32 Collet and Nut Set Imperial 1x Dust shoe minimal use, half a dozen slabs leveled. Located in Pierre, SD $13000 ---
**Author:** ![JayD](https://avatars.discourse-cdn.com/v4/letter/j/e36b37/32.png) [@JayD](https://forum.avidcnc.com/u/JayD)\ **Post date:** [June 10, 2026, 3:15pm UTC](https://forum.avidcnc.com/t/pro60120-13000/5630/2 "2026-06-10T15:15:47Z")
Dropping this down to $11k ish Make an offer. ![IMG_0653](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/d/dcbab5132d0ab58b7e5aa1fcdde8b5686f5b78e4.jpeg) ---
**Author:** ![DCCOnline](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/dcconline/32/6836_2.png) [@DCCOnline](https://forum.avidcnc.com/u/DCCOnline)\ **Post date:** [June 24, 2026, 5:42pm UTC](https://forum.avidcnc.com/t/pro60120-13000/5630/3 "2026-06-24T17:42:39Z")
I am interested- I am in So Cal… Hmmm. Is it/will it be in working order if I travel up to buy it? It isn’t exactly what I am looking for - but it comes close… about 80%- ---
**Author:** ![JayD](https://avatars.discourse-cdn.com/v4/letter/j/e36b37/32.png) [@JayD](https://forum.avidcnc.com/u/JayD)\ **Post date:** [June 24, 2026, 9:58pm UTC](https://forum.avidcnc.com/t/pro60120-13000/5630/4 "2026-06-24T21:58:11Z")
Yes! It all works. It’s not super calibrated because I was only leveling slabs. Have a few big bits with it. Also have a dust collector if you’re interested. And a mega sawstop with all the fixings. ---
**Author:** ![DCCOnline](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/dcconline/32/6836_2.png) [@DCCOnline](https://forum.avidcnc.com/u/DCCOnline)\ **Post date:** [June 25, 2026, 1:46am UTC](https://forum.avidcnc.com/t/pro60120-13000/5630/5 "2026-06-25T01:46:03Z")
Yes- I am super interested in the 60120 and possibly the dust collection unit… I would love the SawStop as well but my wife would shoot me if i bought a third full size table saw. What is your timeline for selling it? We suffered a fire in my hobby shop - started by and consuming my Onefinity CNC machine… last week. I am waiting to see what insurance will say on replacement values. At $11,000 ish this is in my hoped for price range… May I ask about your motivation to sell? Are you getting out of the cnc game or deeper into it? David C Chamberlain ---
**Author:** ![JayD](https://avatars.discourse-cdn.com/v4/letter/j/e36b37/32.png) [@JayD](https://forum.avidcnc.com/u/JayD)\ **Post date:** [June 25, 2026, 2:24am UTC](https://forum.avidcnc.com/t/pro60120-13000/5630/6 "2026-06-25T02:24:01Z")
Built most of my furniture with a dewalt table saw, and whatever I could find. Wanted to go bigger 😂. Tried it. Made several pieces, but they were all custom order, and I didn’t really like that tbh. I just want to make what I make and if it doesn’t sell, push it into the corner. Plus I’m delving into Ai. I’m a weird duck. Here’s what I got. [https://www.grizzly.com/products/grizzly-3-hp-cyclone-dust-collector/g0441](https://www.grizzly.com/products/grizzly-3-hp-cyclone-dust-collector/g0441) [https://www.grizzly.com/products/sawstop-10-3-hp-230v-professional-table-saw-with-52-t-glide-fence-assembly/t30409](https://www.grizzly.com/products/sawstop-10-3-hp-230v-professional-table-saw-with-52-t-glide-fence-assembly/t30409) [https://www.grizzly.com/products/sawstop-sliding-crosscut-table-attachment/t30440](https://www.grizzly.com/products/sawstop-sliding-crosscut-table-attachment/t30440) [https://www.acmetools.com/supermax-tools-19-38-drum-sander-with-open-stand-71938-d/195444195822.html?gad\_source=1&gad\_campaignid=23305433921&gbraid=0AAAAADub60vrwnAK9kcrF4cJ\_iUpZwOE6&gclid=CjwKCAjwgO7RBhBKEiwAZNP85v0L70mcoqeVfnGqciKg6CPXV\_NIl-aSsgX0xzo\_U8flraicfwd64hoCDdwQAvD\_BwE](https://www.acmetools.com/supermax-tools-19-38-drum-sander-with-open-stand-71938-d/195444195822.html?gad_source=1&gad_campaignid=23305433921&gbraid=0AAAAADub60vrwnAK9kcrF4cJ_iUpZwOE6&gclid=CjwKCAjwgO7RBhBKEiwAZNP85v0L70mcoqeVfnGqciKg6CPXV_NIl-aSsgX0xzo_U8flraicfwd64hoCDdwQAvD_BwE) ---
**Author:** ![DCCOnline](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/dcconline/32/6836_2.png) [@DCCOnline](https://forum.avidcnc.com/u/DCCOnline)\ **Post date:** [June 25, 2026, 7:46pm UTC](https://forum.avidcnc.com/t/pro60120-13000/5630/7 "2026-06-25T19:46:36Z")
You’ve seen my picture- Far be it from me to call anyone a weird duck. you have good taste in tools. I have one of everything that you have-except ten years older or more… It is time for an upgrade… What is your timeline and were you looking to make it a package deal on the whole set? I have a table saw slide adaptor- I hardly ever use it these days. Back when I was building cabinets- yes. Not now… I am past sixty and slowing down - just a bit… Are you switching gears and getting out entirely or just rethinking the work flow? ---
**Author:** ![JayD](https://avatars.discourse-cdn.com/v4/letter/j/e36b37/32.png) [@JayD](https://forum.avidcnc.com/u/JayD)\ **Post date:** [June 25, 2026, 9:50pm UTC](https://forum.avidcnc.com/t/pro60120-13000/5630/8 "2026-06-25T21:50:36Z")
We can do a package if you want. I’m good with that. Or just the CNC. otherwise I’ll do the Facebook marketplace. Timewise, I don’t want to wait months, but I’m flexible if you’re going to get it done. ---
**Author:** ![DCCOnline](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/dcconline/32/6836_2.png) [@DCCOnline](https://forum.avidcnc.com/u/DCCOnline)\ **Post date:** [June 26, 2026, 3:55pm UTC](https://forum.avidcnc.com/t/pro60120-13000/5630/9 "2026-06-26T15:55:47Z")
Please give me an idea of what the package deal might look like- To be clear- I spoke with my adjuster yesterday- It doesn’t look like this will resolve before October. If this cannot wait - I will understand. ---
**Author:** ![JayD](https://avatars.discourse-cdn.com/v4/letter/j/e36b37/32.png) [@JayD](https://forum.avidcnc.com/u/JayD)\ **Post date:** [August 19, 2026, 7:17pm UTC](https://forum.avidcnc.com/t/pro60120-13000/5630/10 "2026-08-19T19:17:45Z")
Hey, sorry I missed that, all still available.