# Replacement Bearings for Pro

**URL:** <https://forum.avidcnc.com/t/replacement-bearings-for-pro/2036>\
**Category:** General Chat\
**Created:** [May 5, 2023, 11:53am UTC](https://forum.avidcnc.com/t/replacement-bearings-for-pro/2036 "2023-05-05T11:53:14Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![TwigStudio](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/twigstudio/32/3152_2.png) [@TwigStudio](https://forum.avidcnc.com/u/TwigStudio)\
**Post date:** [May 5, 2023, 11:53am UTC](https://forum.avidcnc.com/t/replacement-bearings-for-pro/2036/1 "2023-05-05T11:53:14Z")

</div>

Hi folks,  
Has anyone used these to replace bearings on their Pro?

[Walfront Open Linear Ball Bearing Slide Block Carriage Slider for Rail Guide CNC, HGH20CA, 20mm, Slider : Amazon.ca: Industrial & Scientific](https://www.amazon.ca/Linear-Bearing-Carriage-Slider-HGH20CA/dp/B07HB11PQX/ref=cm_cr_arp_d_product_top?ie=UTF8)

---

<div class="post-metadata">

**Author:** ![subnoize](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/subnoize/32/2197_2.png) [@subnoize](https://forum.avidcnc.com/u/subnoize)\
**Post date:** [May 5, 2023, 1:03pm UTC](https://forum.avidcnc.com/t/replacement-bearings-for-pro/2036/2 "2023-05-05T13:03:59Z")

</div>

The universal constant is you get what you pay for with bearings.

The product listed doesn’t state a grade and the cost is very low.

---

<div class="post-metadata">

**Author:** ![TwigStudio](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/twigstudio/32/3152_2.png) [@TwigStudio](https://forum.avidcnc.com/u/TwigStudio)\
**Post date:** [May 5, 2023, 2:48pm UTC](https://forum.avidcnc.com/t/replacement-bearings-for-pro/2036/3 "2023-05-05T14:48:21Z")

</div>

Good point - It might not be the best choice. I’m in Canada and ordering from Avid means tons of shipping and duties - Its often way cheaper to find something thats already on this side of the border. As far as I can see, Avid doesn’t give the specs of those bearings (Just the nominal dimensions). If anyone can recommend something that fits and is decent I’d really appreciate it. 🙏

---

<div class="post-metadata">

**Author:** ![TwigStudio](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/twigstudio/32/3152_2.png) [@TwigStudio](https://forum.avidcnc.com/u/TwigStudio)\
**Post date:** [May 5, 2023, 3:16pm UTC](https://forum.avidcnc.com/t/replacement-bearings-for-pro/2036/4 "2023-05-05T15:16:01Z")

</div>

Okay I have a bearing block out. I believe its a Hiwin HG20. but there’s more to the spec.  
I think this is the data sheet. It’s definitely the Square type. Mine measures 24mm high. I’m Guessing HGL-CA? Anyone know well enough to confirm?  
[Linear\_Guideway-(E).pdf](https://forum.avidcnc.com/uploads/short-url/hrMrguV7ZEPY2wpv6zf2HB7yjhe.pdf) (227.9 KB)
