# Safety string for lasers

**URL:** <https://forum.avidcnc.com/t/safety-string-for-lasers/5210>\
**Category:** Everything Lasers\
**Created:** [September 3, 2025, 9:29pm UTC](https://forum.avidcnc.com/t/safety-string-for-lasers/5210 "2025-09-03T21:29:08Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [September 4, 2025, 12:27am UTC](https://forum.avidcnc.com/t/safety-string-for-lasers/5210/2 "2025-09-04T00:27:55Z")

</div>

I kinda wanted that dock… but I cheaped out and designed and 3D printed my own version of it:

 ![image](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/b/bf5a220f31306033cf9a0a5a7605ed8198503271.jpeg)

 ![image](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/6/64d9291774ee877ff5b2e72c9756a9dccd4dbfdc.jpeg)

> **[Fusion](https://gmail826723.autodesk360.com/g/shares/SH286ddQT78850c0d8a45354ccf6359acbbf)**
>
> Share 2D and 3D design files and project files with anyone.

That’s the Fusion file if you want to spin it around.

One thing I did to make sure I didn’t knock the laser off was but a bolt in the back that secures it to the dock. Removing the laser is easy.. I just push it down and remove the one M5 in the back and it’s off.

---

_[View the full topic](https://forum.avidcnc.com/t/safety-string-for-lasers/5210)._