# Saunders Fixture Plate Build Update

**URL:** <https://forum.avidcnc.com/t/saunders-fixture-plate-build-update/2132>\
**Category:** Build Logs\
**Created:** [June 7, 2023, 4:10pm UTC](https://forum.avidcnc.com/t/saunders-fixture-plate-build-update/2132 "2023-06-07T16:10:29Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [June 7, 2023, 5:03pm UTC](https://forum.avidcnc.com/t/saunders-fixture-plate-build-update/2132/2 "2023-06-07T17:03:33Z")

</div>

Those SMW tooling plates are really nice!

I recently did this setup for a trade show:

 ![image](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/e/eacb633669837fabe0afb2c44c38ea2b27dc9e85.jpeg)

These are a couple of generic tooling plates we had. I made some vacuum fixtures on the left and some fixed hold downs on the right.

I had some tiger claw clamps I was going to use, but they didn’t get to me in time so I had to get creative with some delrin scraps I had around.

What is it you’re going to be making on your machine?

---

_[View the full topic](https://forum.avidcnc.com/t/saunders-fixture-plate-build-update/2132)._