# Selling AvidCNC Pro 4x8' in Kent, WA **URL:** \ **Category:** Buy & Sell\ **Created:** [August 26, 2025, 7:33am UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163 "2025-08-26T07:33:51Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![lara](https://avatars.discourse-cdn.com/v4/letter/l/e274bd/32.png) [@lara](https://forum.avidcnc.com/u/lara)\ **Post date:** [August 26, 2025, 7:33am UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/1 "2025-08-26T07:33:51Z")
• 4x8’ capacity • GMT 2.2kW Spindle, 220V 9.7A 400Hz, 24000rpm, air cooled, ER20 collets • Delta VFD022EL21A VFD, 1ph 240V 24A input, 3ph 0-240V 11A 2.2kW output, 0.1-599Hz frequency range, specs: [Delta VFD-EL VFD022EL21A | Delta AC Drives - Delta VFD](https://deltaacdrives.com/delta-vfd022el21a/) • OEMOTOR 85BYGH100B-04 stepper motors, 6.8Nm, 1.8° steps, specs: [https://www.avidcnc.com/cdata/cad/specs/86BYGH100B04\_spec\_sheet.pdf](https://www.avidcnc.com/cdata/cad/specs/86BYGH100B04_spec_sheet.pdf) • AvidCNC CRP8070 drivers • (2) Mean Well model SE-600-48 power supplies, input 120V 12A / 240V 7.5A, output 48V 12.5A • Includes E-stop, touchplate, and tons of collets, bits, etc. I bought the machine in 2017 and upgraded the spindle in 2021. I have an assortment of accessories that can come with it. I’m hoping to get $8,000 but willing to negotiate. Let me know if you have any questions! ![IMG_20220221_212842](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/f/ffab45aba282e4e1b24fb7a1ae4cb955c7e2c146.jpeg) ---
**Author:** ![discourse\_ai\_spam](https://avatars.discourse-cdn.com/v4/letter/d/c68b51/32.png) [@discourse\_ai\_spam](https://forum.avidcnc.com/u/discourse_ai_spam)\ **Post date:** [August 26, 2025, 7:33am UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/2 "2025-08-26T07:33:56Z")
Unlisted on August 26, 2025, 7:33am UTC ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/1X/7dda6d0819a0c6e2df95b328abdc5fff4f25de63.png) [@system](https://forum.avidcnc.com/u/system)\ **Post date:** [August 26, 2025, 11:53am UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/3 "2025-08-26T11:53:40Z")
Listed on August 26, 2025, 11:53am UTC ---
**Author:** ![ftm98366](https://avatars.discourse-cdn.com/v4/letter/f/90db22/32.png) [@ftm98366](https://forum.avidcnc.com/u/ftm98366)\ **Post date:** [October 6, 2025, 7:53pm UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/4 "2025-10-06T19:53:51Z")
Hi Lara, Have you sold this or have you decided to keep this? Thank you, Allan ---
**Author:** ![lara](https://avatars.discourse-cdn.com/v4/letter/l/e274bd/32.png) [@lara](https://forum.avidcnc.com/u/lara)\ **Post date:** [October 20, 2025, 9:20pm UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/5 "2025-10-20T21:20:53Z")
Nope! Still looking to sell! Please let me know if you have any questions. ---
**Author:** ![ftm98366](https://avatars.discourse-cdn.com/v4/letter/f/90db22/32.png) [@ftm98366](https://forum.avidcnc.com/u/ftm98366)\ **Post date:** [November 11, 2025, 12:11am UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/6 "2025-11-11T00:11:57Z")
Are you able to message me directly? I’d like to ask a few more questions about it and see if we can meet up to do a demo. If it is still there. ---
**Author:** ![lara](https://avatars.discourse-cdn.com/v4/letter/l/e274bd/32.png) [@lara](https://forum.avidcnc.com/u/lara)\ **Post date:** [November 12, 2025, 1:08am UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/7 "2025-11-12T01:08:51Z")
@ftm98366 I can’t for the life of me figure out how to send you a direct message. It’s still available. Please email me at xkuarfatty (at) gmail (dot) com ! ---
**Author:** ![ATB1991](https://avatars.discourse-cdn.com/v4/letter/a/d26b3c/32.png) [@ATB1991](https://forum.avidcnc.com/u/ATB1991)\ **Post date:** [November 18, 2025, 3:43am UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/8 "2025-11-18T03:43:30Z")
Is this still available? I’m up in Bellingham and searching for a 4x8 platform for plywood mostly. ---
**Author:** ![lara](https://avatars.discourse-cdn.com/v4/letter/l/e274bd/32.png) [@lara](https://forum.avidcnc.com/u/lara)\ **Post date:** [November 18, 2025, 11:21am UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/9 "2025-11-18T11:21:19Z")
Yes it is still available! Feel free to send me an email to the address in the post above. ---
**Author:** ![NLE](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/nle/32/3880_2.png) [@NLE](https://forum.avidcnc.com/u/NLE)\ **Post date:** [December 19, 2025, 8:41pm UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/10 "2025-12-19T20:41:51Z")
Is this still available? ---
**Author:** ![lara](https://avatars.discourse-cdn.com/v4/letter/l/e274bd/32.png) [@lara](https://forum.avidcnc.com/u/lara)\ **Post date:** [December 22, 2025, 11:57pm UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/11 "2025-12-22T23:57:00Z")
Yes, it is still available! ---
**Author:** ![lara](https://avatars.discourse-cdn.com/v4/letter/l/e274bd/32.png) [@lara](https://forum.avidcnc.com/u/lara)\ **Post date:** [December 30, 2025, 10:42pm UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/12 "2025-12-30T22:42:15Z")
I’m dropping the price to $7000, which is still negotiable! I have a deadline of the end of April when our lease runs up. ---
**Author:** ![lara](https://avatars.discourse-cdn.com/v4/letter/l/e274bd/32.png) [@lara](https://forum.avidcnc.com/u/lara)\ **Post date:** [January 29, 2026, 10:17pm UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/13 "2026-01-29T22:17:04Z")
In talks with several people but still no deal yet ☹ I took some more pictures including pictures of some of the accessories that can come with it. I have way more bits and collets than I realized. Lots of high-quality carbide bits, and lots of assorted non-carbide bits. Most of these were used little or not at all. ![20260127_044635314_iOS](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/0/056b963bbfdfbf4c27753be9b4d82f8a13bf6e26.jpeg) ![20260127_044027382_iOS](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/9/90f6fb80ac5c582eedb05e8d8116bf0b6d7f6dbb.jpeg) ![20260127_044020616_iOS](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/d/d890fc31a6a8b75ba01dbe7b129bb5c58cccb017.jpeg) ---
**Author:** ![SmoothOperator](https://avatars.discourse-cdn.com/v4/letter/s/3bc359/32.png) [@SmoothOperator](https://forum.avidcnc.com/u/SmoothOperator)\ **Post date:** [February 12, 2026, 8:07pm UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/14 "2026-02-12T20:07:26Z")
I sent an email to you yesterday, but thought I’d follow up here as well. In the area and interested, please check your email 🙂 ---
**Author:** ![SmoothOperator](https://avatars.discourse-cdn.com/v4/letter/s/3bc359/32.png) [@SmoothOperator](https://forum.avidcnc.com/u/SmoothOperator)\ **Post date:** [February 23, 2026, 11:48pm UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/15 "2026-02-23T23:48:09Z")
Hi Lara, i responded to your email a few days ago, but perhaps it went to spam again - could you check pleasE? thanks! ---
**Author:** ![Matt0723](https://avatars.discourse-cdn.com/v4/letter/m/5f9b8f/32.png) [@Matt0723](https://forum.avidcnc.com/u/Matt0723)\ **Post date:** [March 10, 2026, 11:18pm UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/16 "2026-03-10T23:18:06Z")
Is this still available or has it been sold? ---
**Author:** ![lara](https://avatars.discourse-cdn.com/v4/letter/l/e274bd/32.png) [@lara](https://forum.avidcnc.com/u/lara)\ **Post date:** [March 16, 2026, 11:21pm UTC](https://forum.avidcnc.com/t/selling-avidcnc-pro-4x8-in-kent-wa/5163/17 "2026-03-16T23:21:28Z")
This machine has been sold ✨