# Site could use an introduction area

**URL:** <https://forum.avidcnc.com/t/site-could-use-an-introduction-area/407>\
**Category:** Site Feedback\
**Created:** [October 14, 2022, 8:14pm UTC](https://forum.avidcnc.com/t/site-could-use-an-introduction-area/407 "2022-10-14T20:14:51Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![MajorTendonitis](https://avatars.discourse-cdn.com/v4/letter/m/ebca7d/32.png) [@MajorTendonitis](https://forum.avidcnc.com/u/MajorTendonitis)\
**Post date:** [October 14, 2022, 8:14pm UTC](https://forum.avidcnc.com/t/site-could-use-an-introduction-area/407/1 "2022-10-14T20:14:51Z")

</div>

A place for new members to introduce themselves. I started a thread in the off topic area ,but if mods could make a sticky

---

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [October 15, 2022, 12:05am UTC](https://forum.avidcnc.com/t/site-could-use-an-introduction-area/407/2 "2022-10-15T00:05:47Z")

</div>

That’s a good suggestion. I was hoping that people would do that in the General section, but it might be worth considering making a separate section for intros…

---

<div class="post-metadata">

**Author:** ![MajorTendonitis](https://avatars.discourse-cdn.com/v4/letter/m/ebca7d/32.png) [@MajorTendonitis](https://forum.avidcnc.com/u/MajorTendonitis)\
**Post date:** [October 15, 2022, 2:21am UTC](https://forum.avidcnc.com/t/site-could-use-an-introduction-area/407/3 "2022-10-15T02:21:15Z")

</div>

I thought the general section was a better option also , but when I read the heading it seemed like it was dedicated to cnc subjects . I’m easily confused though

---

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [October 15, 2022, 11:43am UTC](https://forum.avidcnc.com/t/site-could-use-an-introduction-area/407/4 "2022-10-15T11:43:56Z")

</div>

I think what we’ll do is keep an eye on things and if there’s a need we can make a separate category. For starting out the forum I wanted to keep the categories very simple and straightforward.

---

<div class="post-metadata">

**Author:** ![MajorTendonitis](https://avatars.discourse-cdn.com/v4/letter/m/ebca7d/32.png) [@MajorTendonitis](https://forum.avidcnc.com/u/MajorTendonitis)\
**Post date:** [October 15, 2022, 2:26pm UTC](https://forum.avidcnc.com/t/site-could-use-an-introduction-area/407/5 "2022-10-15T14:26:13Z")

</div>

If you’d prefer , move my thread to general