# Slab flattening with intercon **URL:** \ **Category:** General Chat\ **Created:** [October 4, 2025, 8:20pm UTC](https://forum.avidcnc.com/t/slab-flattening-with-intercon/5320 "2025-10-04T20:20:35Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [October 4, 2025, 10:40pm UTC](https://forum.avidcnc.com/t/slab-flattening-with-intercon/5320/2 "2025-10-04T22:40:24Z")
Did you add a spindle start command in your program? You can also check out this thread: > [@Slab Slayer pocket toolpath generator](https://forum.avidcnc.com/t/slab-slayer-pocket-toolpath-generator/4918): > > Hey all, in some of the free time I had I whipped up this little utility: It’s the “slab slayer”. It’s for folks that just want to get a quick pocket toolpath for flattening things like spoilboards, slabs, etc. You can find the app here: [https://slabslayer.vercel.app](https://slabslayer.vercel.app) I have done some testing on it and it works fine for my uses, if anyone here is interested in testing it out please do. It’s designed only to work with Centroid powered controls. This is NOT an official Avid project, t… --- _[View the full topic](https://forum.avidcnc.com/t/slab-flattening-with-intercon/5320)._