# Slabbing utilites! **URL:** \ **Category:** General Chat\ **Created:** [December 12, 2025, 2:23pm UTC](https://forum.avidcnc.com/t/slabbing-utilites/5562 "2025-12-12T14:23:43Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [December 12, 2025, 2:23pm UTC](https://forum.avidcnc.com/t/slabbing-utilites/5562/1 "2025-12-12T14:23:43Z")
Hey folks, I thought I’d start a post here that’s a source for all of the slabbing and surfacing utilities available to users. The ones that I’ve seen so far: [Slab Slayer](https://forum.avidcnc.com/t/slab-slayer-pocket-toolpath-generator/4918) [Intercon (built into EX control)](https://www.youtube.com/watch?v=Fti_7ybt62Q&t=4s) [Surfinator](https://forum.avidcnc.com/t/surfacing-gadget-for-vectric-vcarve-pro-aspire-the-surfinator-1-0/5561/2) [Slabbing Wizard for Mach 4](https://forum.avidcnc.com/t/slabbing-wizard-for-mach4/1947) Comments on each particular one should be in the linked threads here. But I wanted to have this post as a central reference for anyone coming here trying to find these things. ---
**Author:** ![TimG](https://avatars.discourse-cdn.com/v4/letter/t/82dd89/32.png) [@TimG](https://forum.avidcnc.com/u/TimG)\ **Post date:** [December 14, 2025, 1:34am UTC](https://forum.avidcnc.com/t/slabbing-utilites/5562/2 "2025-12-14T01:34:10Z")
Thanks Eric! I use my Avid machine to do slabs, but for some reason, I really enjoy doing slabs by hand on a 5 by 12 manual table. ![A00AE63F-BF6C-41D1-ADE8-A77F98EFCA4A_1_105_c](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/b/b949645ec46831628438ec4ff9dbf336b32df9f9.jpeg) ---
**Author:** ![Kosh](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/kosh/32/3849_2.png) [@Kosh](https://forum.avidcnc.com/u/Kosh)\ **Post date:** [December 14, 2025, 5:31am UTC](https://forum.avidcnc.com/t/slabbing-utilites/5562/3 "2025-12-14T05:31:41Z")
Ha! Thanks Eric! I’ve been doing custom CAM ops in F360 (model a blank piece of stock for each use case). Will have to look at the mach 4 approach, I’m about to level the top for a custom jewelry box (wedding present for our future daughter-in-law).