# STEP file for rotary axis for Fusion? **URL:** \ **Category:** General Chat\ **Tags:** fusion-360, rotary-axis\ **Created:** [April 6, 2026, 3:22am UTC](https://forum.avidcnc.com/t/step-file-for-rotary-axis-for-fusion/5988 "2026-04-06T03:22:53Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![GreySoul](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/greysoul/32/4538_2.png) [@GreySoul](https://forum.avidcnc.com/u/GreySoul)\ **Post date:** [April 6, 2026, 3:22am UTC](https://forum.avidcnc.com/t/step-file-for-rotary-axis-for-fusion/5988/1 "2026-04-06T03:22:53Z")
Does anyone have a STEP file that will work as a fixture in Fusion? I don’t need an exact copy of the Avid rotary assembly, but would be nice to have a proper sized chuck and tail/center to put into Fusion for their fixture / collision avoidance ability. Thanks! ---
**Author:** ![grossmsj](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/grossmsj/32/4903_2.png) [@grossmsj](https://forum.avidcnc.com/u/grossmsj)\ **Post date:** [April 6, 2026, 3:06pm UTC](https://forum.avidcnc.com/t/step-file-for-rotary-axis-for-fusion/5988/2 "2026-04-06T15:06:10Z")
Messaged you. ---
**Author:** ![printermonkeys](https://avatars.discourse-cdn.com/v4/letter/p/a87d85/32.png) [@printermonkeys](https://forum.avidcnc.com/u/printermonkeys)\ **Post date:** [April 15, 2026, 8:57pm UTC](https://forum.avidcnc.com/t/step-file-for-rotary-axis-for-fusion/5988/3 "2026-04-15T20:57:52Z")
I’d appreciate a file for this as well. we are trying to get our CAM fixturing setup before our rotary arrives ---
**Author:** ![grossmsj](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/grossmsj/32/4903_2.png) [@grossmsj](https://forum.avidcnc.com/u/grossmsj)\ **Post date:** [April 15, 2026, 9:53pm UTC](https://forum.avidcnc.com/t/step-file-for-rotary-axis-for-fusion/5988/4 "2026-04-15T21:53:21Z")
Welcome to the Avid Community Eric! Check your messages. Scott