# Tip to keep electronics less dusty inside your enclosures **URL:** \ **Category:** General Chat\ **Created:** [September 17, 2023, 8:09pm UTC](https://forum.avidcnc.com/t/tip-to-keep-electronics-less-dusty-inside-your-enclosures/2460 "2023-09-17T20:09:32Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![ronnierozier2](https://avatars.discourse-cdn.com/v4/letter/r/a183cd/32.png) [@ronnierozier2](https://forum.avidcnc.com/u/ronnierozier2)\ **Post date:** [September 17, 2023, 8:09pm UTC](https://forum.avidcnc.com/t/tip-to-keep-electronics-less-dusty-inside-your-enclosures/2460/1 "2023-09-17T20:09:32Z")
here is a little tip or trick to keep the inside of your electronic boxes less dusty inside. I have been running these magnetic screen filters for about a year now without any issues and the electronics inside are still pretty clean. from time to to ill take them off and blow them off with my air compressor then slap them right back on. check out the attached pictures just a little friendly Tip or Trick. ![filter1](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/f/fa6a06e1da10a2da337310c6458bfffb07fa1bee.jpeg) ![filter2](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/4/4a45b30895c8f4debefa7d9981dad08317dba0e7.jpeg) ---
**Author:** ![JeffsDesign](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jeffsdesign/32/5574_2.png) [@JeffsDesign](https://forum.avidcnc.com/u/JeffsDesign)\ **Post date:** [September 17, 2023, 9:57pm UTC](https://forum.avidcnc.com/t/tip-to-keep-electronics-less-dusty-inside-your-enclosures/2460/2 "2023-09-17T21:57:20Z")
That’s a great!! Idea!! but you gotta get those chips up That’s a Fire hazard…😱😁 ---
**Author:** ![ronnierozier2](https://avatars.discourse-cdn.com/v4/letter/r/a183cd/32.png) [@ronnierozier2](https://forum.avidcnc.com/u/ronnierozier2)\ **Post date:** [September 24, 2023, 5:50pm UTC](https://forum.avidcnc.com/t/tip-to-keep-electronics-less-dusty-inside-your-enclosures/2460/3 "2023-09-24T17:50:23Z")
no kidding, with those filters installed from day 1 this is what my electronics look like 14 months later roughly. i have not opened these boxes since i built the machine ![1 year later](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/2X/7/724cce2b07b4990a397be3bd1bb34e67930a7285.jpeg) ---
**Author:** ![Drich](https://avatars.discourse-cdn.com/v4/letter/d/a183cd/32.png) [@Drich](https://forum.avidcnc.com/u/Drich)\ **Post date:** [October 9, 2023, 1:23am UTC](https://forum.avidcnc.com/t/tip-to-keep-electronics-less-dusty-inside-your-enclosures/2460/4 "2023-10-09T01:23:32Z")
did you make them or order then online? ---
**Author:** ![ronnierozier2](https://avatars.discourse-cdn.com/v4/letter/r/a183cd/32.png) [@ronnierozier2](https://forum.avidcnc.com/u/ronnierozier2)\ **Post date:** [October 9, 2023, 1:47am UTC](https://forum.avidcnc.com/t/tip-to-keep-electronics-less-dusty-inside-your-enclosures/2460/5 "2023-10-09T01:47:53Z")
Ordered them off Amazon ---
**Author:** ![Drich](https://avatars.discourse-cdn.com/v4/letter/d/a183cd/32.png) [@Drich](https://forum.avidcnc.com/u/Drich)\ **Post date:** [October 9, 2023, 4:00am UTC](https://forum.avidcnc.com/t/tip-to-keep-electronics-less-dusty-inside-your-enclosures/2460/6 "2023-10-09T04:00:15Z")
thanks, just ordered some ---
**Author:** ![ronnierozier2](https://avatars.discourse-cdn.com/v4/letter/r/a183cd/32.png) [@ronnierozier2](https://forum.avidcnc.com/u/ronnierozier2)\ **Post date:** [October 9, 2023, 4:58am UTC](https://forum.avidcnc.com/t/tip-to-keep-electronics-less-dusty-inside-your-enclosures/2460/7 "2023-10-09T04:58:15Z")
They work very well, you will be happy with them