# Tool Height Setter - Replacement plastic cover or STL file needed

**URL:** <https://forum.avidcnc.com/t/tool-height-setter-replacement-plastic-cover-or-stl-file-needed/6589>\
**Category:** General Chat\
**Tags:** ex-controller, tool-height-setter\
**Created:** [September 17, 2026, 8:57pm UTC](https://forum.avidcnc.com/t/tool-height-setter-replacement-plastic-cover-or-stl-file-needed/6589 "2026-09-17T20:57:11Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![SunCItyJim](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@SunCItyJim](https://forum.avidcnc.com/u/SunCItyJim)\
**Post date:** [September 17, 2026, 8:57pm UTC](https://forum.avidcnc.com/t/tool-height-setter-replacement-plastic-cover-or-stl-file-needed/6589/1 "2026-09-17T20:57:11Z")

</div>

Our tool height setter’s plastic cover is damaged and needs to be replaced … Where can I source one, or better yet, has anyone made a 3d printed one?

---

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [September 18, 2026, 1:52am UTC](https://forum.avidcnc.com/t/tool-height-setter-replacement-plastic-cover-or-stl-file-needed/6589/2 "2026-09-18T01:52:54Z")

</div>

I’d reach out to support. I am sure they can get you setup with one

---

<div class="post-metadata">

**Author:** ![SunCItyJim](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@SunCItyJim](https://forum.avidcnc.com/u/SunCItyJim)\
**Post date:** [September 18, 2026, 1:58am UTC](https://forum.avidcnc.com/t/tool-height-setter-replacement-plastic-cover-or-stl-file-needed/6589/3 "2026-09-18T01:58:32Z")

</div>

Found one - [https://www.printables.com/model/1716861-avid-cnc-tool-height-setter-cover/files](https://www.printables.com/model/1716861-avid-cnc-tool-height-setter-cover/files)

I’ll verify fit tomorrow

---

<div class="post-metadata">

**Author:** ![JeffsDesign](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jeffsdesign/32/5574_2.png) [@JeffsDesign](https://forum.avidcnc.com/u/JeffsDesign)\
**Post date:** [September 18, 2026, 4:27pm UTC](https://forum.avidcnc.com/t/tool-height-setter-replacement-plastic-cover-or-stl-file-needed/6589/4 "2026-09-18T16:27:57Z")

</div>

It doesn’t have any plastic on the top I wonder if that’s a good thing or a bad thing? Like more surface area for larger bits?