# Torque wrenches

**URL:** <https://forum.avidcnc.com/t/torque-wrenches/4280>\
**Category:** General Chat\
**Created:** [January 22, 2025, 10:34pm UTC](https://forum.avidcnc.com/t/torque-wrenches/4280 "2025-01-22T22:34:57Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![JeffsDesign](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jeffsdesign/32/5574_2.png) [@JeffsDesign](https://forum.avidcnc.com/u/JeffsDesign)\
**Post date:** [January 22, 2025, 10:34pm UTC](https://forum.avidcnc.com/t/torque-wrenches/4280/1 "2025-01-22T22:34:57Z")

</div>

Hi Guys,  
Can you recommend a good torque wrench for the Er20 collet? Would I also need the fork type adapter.  
I know I’ve seen it done a thousand times with out just want a piece of mind and it be good to have in the shop

Thanks  
Jeff

---

<div class="post-metadata">

**Author:** ![JeffsDesign](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jeffsdesign/32/5574_2.png) [@JeffsDesign](https://forum.avidcnc.com/u/JeffsDesign)\
**Post date:** [January 23, 2025, 5:58pm UTC](https://forum.avidcnc.com/t/torque-wrenches/4280/2 "2025-01-23T17:58:51Z")

</div>

Okay, I’ll ask my Mechanic 😉

---

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [January 23, 2025, 6:46pm UTC](https://forum.avidcnc.com/t/torque-wrenches/4280/3 "2025-01-23T18:46:28Z")

</div>

Good discussion about that here:

> [@Collet "tightness"](https://forum.avidcnc.com/t/collet-tightness/1118):
>
> Hi all, This seems like a rudimentary issue but it’s irking me so I thought I’d check if anyone else has this problem. I have the EB20 collet kit from Avid. Using a 1/4" compression bit from Whiteside and the 1/4" EB20 collet, the bit keeps dropping lower in the collet. This results in big gouges in the spoilboard. I’ve resorted to CRANKING the collet as tight as I can. I have never had to do this before with other collets and I’ve been doing this stuff for a long time. My experience has been th…

---

<div class="post-metadata">

**Author:** ![berrianmtn](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/berrianmtn/32/4852_2.png) [@berrianmtn](https://forum.avidcnc.com/u/berrianmtn)\
**Post date:** [January 25, 2025, 12:22am UTC](https://forum.avidcnc.com/t/torque-wrenches/4280/4 "2025-01-25T00:22:25Z")

</div>

I have been considering adding the Amana torque wrench: [Amana Tool ATW-32 Adjustable Torque Wrench for ER32 Collet 50mm Dia x 15-1/2 Inch Length - Amazon.com](https://www.amazon.com/Amana-Tool-ATW-32-Adjustable-Torque/dp/B08P2D2V5V/ref=asc_df_B08P2D2V5V?mcid=f2cad74880603936be636f4d4eae6393&hvocijid=9643222737415623636-B08P2D2V5V-&hvexpln=73&tag=hyprod-20&linkCode=df0&hvadid=721245378154&hvpos=&hvnetw=g&hvrand=9643222737415623636&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1014485&hvtargid=pla-2281435177658&psc=1)

While it seems expensive for a single purpose tool, I recently (documented on this forum not long ago) lost an expensive bit due to under torquing a bit that slipped.

One or two of those preventions, plus the peace of mind, might just be enough to justify.

---

<div class="post-metadata">

**Author:** ![JeffsDesign](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jeffsdesign/32/5574_2.png) [@JeffsDesign](https://forum.avidcnc.com/u/JeffsDesign)\
**Post date:** [January 25, 2025, 4:35pm UTC](https://forum.avidcnc.com/t/torque-wrenches/4280/5 "2025-01-25T16:35:22Z")

</div>

[quote=“berrianmtn, post:4, topic:4280, full:true”]  
I have been considering adding the Amana torque wrench: [Amana Tool ATW-32 Adjustable Torque Wrench for ER32 Collet 50mm Dia x 15-1/2 Inch Length - Amazon.com](https://www.amazon.com/Amana-Tool-ATW-32-Adjustable-Torque/dp/B08P2D2V5V/ref=asc_df_B08P2D2V5V?mcid=f2cad74880603936be636f4d4eae6393&hvocijid=9643222737415623636-B08P2D2V5V-&hvexpln=73&tag=hyprod-20&linkCode=df0&hvadid=721245378154&hvpos=&hvnetw=g&hvrand=9643222737415623636&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1014485&hvtargid=pla-2281435177658&psc=1)

I think those are for atc setup’s so that wouldn’t work for me I have the nut an collet right now. I’m using the supplied wrenches

Appreciate the help guys  
Thanks
