# Torque wrenches

**URL:** <https://forum.avidcnc.com/t/torque-wrenches/4280>\
**Category:** General Chat\
**Created:** [January 22, 2025, 10:34pm UTC](https://forum.avidcnc.com/t/torque-wrenches/4280 "2025-01-22T22:34:57Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [January 23, 2025, 6:46pm UTC](https://forum.avidcnc.com/t/torque-wrenches/4280/3 "2025-01-23T18:46:28Z")

</div>

Good discussion about that here:

> [@Collet "tightness"](https://forum.avidcnc.com/t/collet-tightness/1118):
>
> Hi all, This seems like a rudimentary issue but it’s irking me so I thought I’d check if anyone else has this problem. I have the EB20 collet kit from Avid. Using a 1/4" compression bit from Whiteside and the 1/4" EB20 collet, the bit keeps dropping lower in the collet. This results in big gouges in the spoilboard. I’ve resorted to CRANKING the collet as tight as I can. I have never had to do this before with other collets and I’ve been doing this stuff for a long time. My experience has been th…

---

_[View the full topic](https://forum.avidcnc.com/t/torque-wrenches/4280)._
