# Updated Laser post processors for Vectric

**URL:** <https://forum.avidcnc.com/t/updated-laser-post-processors-for-vectric/1019>\
**Category:** Everything Lasers\
**Tags:** lasers\
**Created:** [October 22, 2022, 4:12am UTC](https://forum.avidcnc.com/t/updated-laser-post-processors-for-vectric/1019 "2022-10-22T04:12:28Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![jjneeb](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jjneeb/32/244_2.png) [@jjneeb](https://forum.avidcnc.com/u/jjneeb)\
**Post date:** [October 22, 2022, 4:12am UTC](https://forum.avidcnc.com/t/updated-laser-post-processors-for-vectric/1019/1 "2022-10-22T04:12:28Z")

</div>

For any of you that use the laser post processors I wrote for Vcarve/Aspire, I just updated all of them for an issue I discovered while lasering on a 3D surface today. They can be found in the post processors directory.

[https://drive.google.com/drive/folders/1xB6J0RZIU1j8g951NkP-8HXC1swC2C-B?usp=sharing](https://drive.google.com/drive/folders/1xB6J0RZIU1j8g951NkP-8HXC1swC2C-B?usp=sharing)

---

<div class="post-metadata">

**Author:** ![ezambob](https://avatars.discourse-cdn.com/v4/letter/e/a88e4f/32.png) [@ezambob](https://forum.avidcnc.com/u/ezambob)\
**Post date:** [October 23, 2022, 3:44am UTC](https://forum.avidcnc.com/t/updated-laser-post-processors-for-vectric/1019/2 "2022-10-23T03:44:22Z")

</div>

Thanks Jim, very much appreciated!

---

<div class="post-metadata">

**Author:** ![Erik](https://avatars.discourse-cdn.com/v4/letter/e/b5ac83/32.png) [@Erik](https://forum.avidcnc.com/u/Erik)\
**Post date:** [October 23, 2022, 3:55am UTC](https://forum.avidcnc.com/t/updated-laser-post-processors-for-vectric/1019/3 "2022-10-23T03:55:49Z")

</div>

Thank you sir. Great work as always.

---

<div class="post-metadata">

**Author:** ![ezambob](https://avatars.discourse-cdn.com/v4/letter/e/a88e4f/32.png) [@ezambob](https://forum.avidcnc.com/u/ezambob)\
**Post date:** [October 23, 2022, 4:33am UTC](https://forum.avidcnc.com/t/updated-laser-post-processors-for-vectric/1019/4 "2022-10-23T04:33:46Z")

</div>

Jim,

Just an FYI, I was getting a Duplicate name error per the attached screenshot…

 ![Duplicate Post Processor Name Error](https://canada1.discourse-cdn.com/flex027/uploads/avidcnc/original/1X/266281152c429cdcb8d882fe6f150b7bea764928.png)

---

<div class="post-metadata">

**Author:** ![jjneeb](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/jjneeb/32/244_2.png) [@jjneeb](https://forum.avidcnc.com/u/jjneeb)\
**Post date:** [October 23, 2022, 3:04pm UTC](https://forum.avidcnc.com/t/updated-laser-post-processors-for-vectric/1019/5 "2022-10-23T15:04:14Z")

</div>

Good catch Bob. I changed the filename to follow the theme of the other 3 and forgot to change that line internally. I loaded the fixed on on the drive. Thanks.