# Woby Camera Mount

**URL:** <https://forum.avidcnc.com/t/woby-camera-mount/40>\
**Category:** Projects\
**Created:** [August 30, 2022, 1:12am UTC](https://forum.avidcnc.com/t/woby-camera-mount/40 "2022-08-30T01:12:19Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [August 30, 2022, 1:12am UTC](https://forum.avidcnc.com/t/woby-camera-mount/40/1 "2022-08-30T01:12:19Z")

</div>

Here’s our friend @Alma_PinkSoulStudios making the Woby camera mount:

[https://www.instagram.com/p/ChXJfJXjvmc/](https://www.instagram.com/p/ChXJfJXjvmc/)

We’re probably going to make a few of these for filming in our shop!

This is the link to the original design: [WOBY CAMERA JIG 2.0 (+VERSION 1) — Woby Design](https://www.woby.design/shop/the-woby-camera-jig-digital-files)

---

<div class="post-metadata">

**Author:** ![PeterGrace](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/petergrace/32/57_2.png) [@PeterGrace](https://forum.avidcnc.com/u/PeterGrace)\
**Post date:** [October 15, 2022, 1:32am UTC](https://forum.avidcnc.com/t/woby-camera-mount/40/2 "2022-10-15T01:32:06Z")

</div>

> [@Eric](#):
>
> This is the link to the original design: [WOBY CAMERA JIG 2.0 (+VERSION 1) — Woby Design](https://www.woby.design/shop/the-woby-camera-jig-digital-files)

I just bought the plans, can’t wait to cut a couple of these!

---

<div class="post-metadata">

**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\
**Post date:** [October 15, 2022, 7:37am UTC](https://forum.avidcnc.com/t/woby-camera-mount/40/3 "2022-10-15T07:37:42Z")

</div>

Please post pictures when you do!