# Workholding Vote? **URL:** \ **Category:** General Chat\ **Created:** [February 15, 2023, 6:28pm UTC](https://forum.avidcnc.com/t/workholding-vote/1727 "2023-02-15T18:28:51Z")\ **Posts on this page:** 4\ **Page:** 3
**Author:** ![subnoize](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/subnoize/32/2197_2.png) [@subnoize](https://forum.avidcnc.com/u/subnoize)\ **Post date:** [August 18, 2023, 12:56pm UTC](https://forum.avidcnc.com/t/workholding-vote/1727/41 "2023-08-18T12:56:16Z")
The Ametek-Lamb 122178-18 are nice motors. They really are the only motors that can sustain a high enough flow rate that us mere mortals can afford to buy. In flow through fixturing the key is a high CFM, not a high vacuum in inHg or inH2O. ---
**Author:** ![Eric](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/eric/32/3220_2.png) [@Eric](https://forum.avidcnc.com/u/Eric)\ **Post date:** [August 18, 2023, 6:57pm UTC](https://forum.avidcnc.com/t/workholding-vote/1727/42 "2023-08-18T18:57:56Z")
[https://www.centralvacuummotor.com/lighthouse.htm](https://www.centralvacuummotor.com/lighthouse.htm) This is where I always sourced my motors from. Cheap and they worked very well. That website is a real trip too. Straight out of the 90s ---
**Author:** ![MBergeron](https://avatars.discourse-cdn.com/v4/letter/m/dc4da7/32.png) [@MBergeron](https://forum.avidcnc.com/u/MBergeron)\ **Post date:** [August 19, 2023, 2:36am UTC](https://forum.avidcnc.com/t/workholding-vote/1727/43 "2023-08-19T02:36:07Z")
Thanks for the info!! ---
**Author:** ![subnoize](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/subnoize/32/2197_2.png) [@subnoize](https://forum.avidcnc.com/u/subnoize)\ **Post date:** [August 19, 2023, 3:11am UTC](https://forum.avidcnc.com/t/workholding-vote/1727/44 "2023-08-19T03:11:10Z")
Brent over at Central Vac knows his stuff. He’s not a CNC guy but if you have questions, he is the guy who would know. [Previous page](https://forum.avidcnc.com/t/workholding-vote/1727.md?page=2)