# Workholding Vote? **URL:** https://forum.avidcnc.com/t/workholding-vote/1727 **Category:** General Chat **Created:** [February 15, 2023, 6:28pm UTC](https://forum.avidcnc.com/t/workholding-vote/1727 "2023-02-15T18:28:51Z") **Posts on this page:** 1 **Showing post:** 28
### Author: ![da-kengineer-meister](https://avatars.discourse-cdn.com/v4/letter/d/f1d935/32.png) [@da-kengineer-meister](https://forum.avidcnc.com/u/da-kengineer-meister) #### Post date: [February 17, 2023, 11:02pm UTC](https://forum.avidcnc.com/t/workholding-vote/1727/28 "2023-02-17T23:02:27Z")
@mitermikeswoodshop > is that a plasma cutter attached to your gantry? Yes, that is a plasma cutter on a 2’nd Z-Axis on the gantry. CNCRouterParts/AVIDcnc set this machine up for me that way. It is a 4’x8’ machine. I’ve got a rotary axis recessed, parallel to the X-Axis of the machine, then about 30"x48" of swarfboard with the embedded screw down anchors for working with the router. (I do a few projects in wood and a whole bunch in acrylic there) and lastly, On the far side I’ve got a 4’x4’ section with a water table on it for plasma. I’ve posted a few projects on this forum of the plasma cutter in action. [https://forum.avidcnc.com/t/a-lighted-sign-for-the-workshop/1713](https://forum.avidcnc.com/t/a-lighted-sign-for-the-workshop/1713) It works great and I use it a ton. -Kenneth --- _[View the full topic](https://forum.avidcnc.com/t/workholding-vote/1727)._