# Y axis hanging on one side

**URL:** <https://forum.avidcnc.com/t/y-axis-hanging-on-one-side/2285>\
**Category:** General Chat\
**Created:** [July 30, 2023, 10:52am UTC](https://forum.avidcnc.com/t/y-axis-hanging-on-one-side/2285 "2023-07-30T10:52:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![aroff](https://avatars.discourse-cdn.com/v4/letter/a/278dde/32.png) [@aroff](https://forum.avidcnc.com/u/aroff)\
**Post date:** [July 30, 2023, 10:52am UTC](https://forum.avidcnc.com/t/y-axis-hanging-on-one-side/2285/1 "2023-07-30T10:52:34Z")

</div>

Y axis stalling, one side not keeping up. All was good till a bit buried itself in a project. Bit slipped  
Since then one side hangs when moving with mach4. Moves fine by hand with motors disabled  
replaced bearings, pinion and belts

Have video but no where to attach it

---

<div class="post-metadata">

**Author:** ![subnoize](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.avidcnc.com/subnoize/32/2197_2.png) [@subnoize](https://forum.avidcnc.com/u/subnoize)\
**Post date:** [July 31, 2023, 8:59pm UTC](https://forum.avidcnc.com/t/y-axis-hanging-on-one-side/2285/2 "2023-07-31T20:59:05Z")

</div>

I miss read your post, sorry. My solution would not work for you. Call the factory.

The up arrow will allow you to post a video.