# \#gcode

**URL:** https://forum.avidcnc.com/tag/gcode/55.md

[Latest](https://forum.avidcnc.com/latest.md) · [Categories](https://forum.avidcnc.com/categories.md) · [Tags](https://forum.avidcnc.com/tags.md)

---

## [Running a job with multiple WCS](https://forum.avidcnc.com/t/running-a-job-with-multiple-wcs/4439)

<div class="topic-metadata">

**Author:** [@Zmurphy](https://forum.avidcnc.com/u/Zmurphy)\
**Replies:** 3\
**Last updated:** [February 25, 2025, 8:28pm UTC](https://forum.avidcnc.com/t/running-a-job-with-multiple-wcs/4439 "2025-02-25T20:28:05Z")

</div>

I have a job that I am having problems with after moving to the EX controller. I make a small box that uses G54 and G55 in the gcode. The box and the lid are machined from their own stock and set to G54 and G55 respectiv…

---

## [Step-down cuts are on a different path?](https://forum.avidcnc.com/t/step-down-cuts-are-on-a-different-path/2571)

<div class="topic-metadata">

**Author:** [@efhuig](https://forum.avidcnc.com/u/efhuig)\
**Replies:** 15\
**Last updated:** [October 30, 2023, 1:09am UTC](https://forum.avidcnc.com/t/step-down-cuts-are-on-a-different-path/2571 "2023-10-30T01:09:30Z")

</div>

Hi, hopefully I can explain what’s going on clear enough and someone can help me out. I’ve been using my Pro 4x8 for almost two years (as a hobbyist) with pretty decent success. Yesterday I started cutting out pieces for…

---

## [Troubleshooting help needed](https://forum.avidcnc.com/t/troubleshooting-help-needed/2306)

<div class="topic-metadata">

**Author:** [@KriegTiger](https://forum.avidcnc.com/u/KriegTiger)\
**Replies:** 11\
**Last updated:** [August 8, 2023, 2:51am UTC](https://forum.avidcnc.com/t/troubleshooting-help-needed/2306 "2023-08-08T02:51:00Z")

</div>

Hey folks. I finally finished getting my system setup and physically things seem great, but I’m running into issues and can’t figure it out. I’m trying to do the ‘tool tray’ tutorial and seemingly at various random poin…